Dear Wolfgang, Where exactly did you get the U-Boot source code from?
Various sources in fact: http://bitshrine.org/gpp/u-boot-1.3.3-lpc32xx.patch http://git.lpclinux.com/?p=uboot-2009.03-lpc32xx.git;a=summary http://git.lpclinux.com/?p=uboot-2011.12-lpc32xx.git;a=summary https://github.com/sobczyk/u-boot I think the problem might be related to the big size of .Work section. (About 63 MB while board's SRAM is 64 MB!) Is it possible that clearing .Work, collapses U-Boot which is stored in SRAM at 0x83fc0000? BTW, it is a little weird that U-Boot loads .start @ 0x80000000 and then clears .vector at the same address: Loading .start @ 0x80000000 (1120 bytes) Clearing .vector @ 0x80000000 (5952 bytes) Might the problem be related to the wrong structure of my ELF file? Thanks, SAeeD On Mon, Sep 17, 2012 at 9:47 AM, Wolfgang Denk <[email protected]> wrote: > Dear SAeeD, > > In message <CAEdVrmO=+ > [email protected]> you wrote: > > > > I have built an RTEMS 4.10.2 elf image for Phycore LPC3250. I am using > ... > > I have tried both u-boot 1.3.3 and u-boot 2009.03 and have not found any > > improvements. > > These are two very old versions. Forthermore, it appears that the > Phycore LPC3250 is not supported in mainline U-Boot (mr what would the > exact board name be?). > > Where exactly did you get the U-Boot source code from? > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] > If A equals success, then the formula is A = X + Y + Z. X is work. Y > is play. Z is keep your mouth shut. - Albert Einstein >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
