Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit a9f1a4893364ddbb8b7942cded91d4c17c4f5948:
lsxl: support power switch (2012-09-03 17:48:51 +0530)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 1d9b033269263a69f7402f508c17b242fc7fea43:
mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
----------------------------------------------------------------
Ashok Kumar Reddy (2):
ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
mx6qsabrelite:Use IMX_GPIO_NR Macro
Benoît Thébaudeau (8):
mx35: Fix decode_pll
mx35: Add definitions for clock gate values
mx35: Fix clock dividers
mx25: Define default SoC input clock frequencies
mx35: Define default SoC input clock frequencies
mx35 timer: Switch to 32-kHz source
Fix mx31_decode_pll
mx31: Define default SoC input clock frequencies
Fabio Estevam (3):
mx28evk: Convert to mxs_adjust_memory_params()
mx28evk: Add USB Ethernet support
mx35pdk: README: Remove NAND references
Marek Vasut (7):
M28: Fix the use of gpmi-nand in mtdparts
MX28: Cleanup mxsboot within make mrproper
MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
SCSPS1: Enable caches
MX28: SPI: Fix the DMA DCache race condition
MX28: SPI: Fix the DMA chaining
MX28: MMC: Avoid DMA DCache race condition
Matt Sealey (1):
efikamx: refine USB support
Otavio Salvador (3):
MX28: mx28evk: Align SSP clock speed
MX28: mx28evk: Enable SPI DMA
mx28evk: extend default environment
Stefano Babic (3):
MX: set a common place to share code for Freescale i.MX
MX35: mx35pdk: add support for MMC
MX6: drop binary constants from iomux header
Makefile | 8 +-
arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
arch/arm/cpu/arm1136/mx31/timer.c | 16 +--
arch/arm/cpu/arm1136/mx35/generic.c | 90 ++++++--------
arch/arm/cpu/arm1136/mx35/timer.c | 46 +++++---
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +--
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
.../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
arch/arm/include/asm/arch-mx25/clock.h | 14 +++
arch/arm/include/asm/arch-mx31/clock.h | 14 +++
arch/arm/include/asm/arch-mx35/clock.h | 14 +++
arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +++-----
arch/arm/include/asm/arch-mx6/iomux.h | 124
++++++++++----------
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx35pdk/README | 78 +-----------
board/freescale/mx35pdk/mx35pdk.c | 25 ++++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 ++--
board/genesi/mx51_efikamx/Makefile | 6 +-
board/genesi/mx51_efikamx/efikamx-usb.c | 12 ++
board/genesi/mx51_efikamx/efikamx.c | 3 -
drivers/mmc/mxsmmc.c | 4 +
drivers/spi/mxs_spi.c | 58 +++++----
include/configs/flea3.h | 1 -
include/configs/ima3-mx53.h | 3 +-
include/configs/imx31_litekit.h | 1 -
include/configs/imx31_phycore.h | 1 -
include/configs/m28evk.h | 4 +-
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 86 ++++++++++++--
include/configs/mx31ads.h | 2 -
include/configs/mx31pdk.h | 2 -
include/configs/mx35pdk.h | 18 ++-
include/configs/qong.h | 2 -
include/configs/sc_sps_1.h | 2 -
include/configs/tt01.h | 2 -
include/configs/zmx25.h | 1 -
44 files changed, 409 insertions(+), 349 deletions(-)
rename arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%)
rename arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%)
rename arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c}
(100%)
rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
