Some of the boards using the mpc512x serial driver didn't properly define which PSC console to use. This caused breakage when building with CONFIG_SERIAL_MULTI enabled. Fix this by defining the default PSC console.
Signed-off-by: Marek Vasut <ma...@denx.de> Cc: Marek Vasut <marek.va...@gmail.com> Cc: Tom Rini <tr...@ti.com> Cc: Anatolij Gustschin <ag...@denx.de> Cc: Stefan Roese <s...@denx.de> --- include/configs/aria.h | 1 + include/configs/mecp5123.h | 1 + include/configs/mpc5121ads.h | 1 + 3 files changed, 3 insertions(+) diff --git a/include/configs/aria.h b/include/configs/aria.h index b21b495..0b31c50 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -322,6 +322,7 @@ * Serial console configuration */ #define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ +#define CONFIG_SYS_PSC3 #if CONFIG_PSC_CONSOLE != 3 #error CONFIG_PSC_CONSOLE must be 3 #endif diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index b41bda9..cafc273 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -222,6 +222,7 @@ * Serial console configuration */ #define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#define CONFIG_SYS_PSC3 #if CONFIG_PSC_CONSOLE != 3 #error CONFIG_PSC_CONSOLE must be 3 #endif diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 9d1327f..3f55d35 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -290,6 +290,7 @@ * Serial console configuration */ #define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#define CONFIG_SYS_PSC3 #if CONFIG_PSC_CONSOLE != 3 #error CONFIG_PSC_CONSOLE must be 3 #endif -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
