Without usb-serial cable plugged at this stage, some garbage is seen in UART RX FIFO, which blocks autoboot progress. The fix makes sure to empty the RX FIFO, before we wait for user input to interrupt autoboot.
Signed-off-by: Ramesh Chandrasekaran <[email protected]> --- board/st-ericsson/snowball/snowball.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c index 8c743c0..e750df1 100644 --- a/board/st-ericsson/snowball/snowball.c +++ b/board/st-ericsson/snowball/snowball.c @@ -253,6 +253,10 @@ int board_late_init(void) if ((raise_ab8500_gpio16() < 0)) printf("error: cant' raise GPIO16\n"); + /* empty UART RX FIFO */ + while (tstc()) + (void) getc(); + return 0; } -- 1.7.5.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
