Dear Stefan Roese,
In message <1345175741-18016-1-git-send-email...@denx.de> you wrote:
> This patch moves all bootcount implementations into a common
> directory: drivers/bootcount. The generic bootcount driver
> is now usable not only by powerpc platforms, but others as well.
>
> Signed-off-by: Stefan Roese <s...@denx.de>
> Cc: Heiko Schocher <h...@denx.de>
> Cc: Valentin Longchamp <valentin.longch...@keymile.com>
> Cc: Christian Riesch <christian.rie...@omicron.at>
> Cc: Manfred Rudigier <manfred.rudig...@omicron.at>
> Cc: Mike Frysinger <vap...@gentoo.org>
> Cc: Rob Herring <rob.herr...@calxeda.com>
> Cc: Reinhard Meyer <reinhard.me...@emk-elektronik.de>
> Tested-by: Valentin Longchamp <valentin.longch...@keymile.com>
> Tested-by: Christian Riesch <christian.rie...@omicron.at>
> Acked-by: Rob Herring <rob.herr...@calxeda.com>
> ---
> v5:
> - Removed bootcount target from arch/blackfin/cpu/Makefile
> as pointer out by Mike (thanks)
>
> v4:
> - Rebased against TOT
> - Addressed Mike's comments
>
> v3:
> - Moved le-/be-accessors into header so that they now can be
> used by all bootcount drivers.
> - Changed CONFIG_BOOTCOUNT_LE to CONFIG_SYS_BOOTCOUNT_LE
> - Enabled CONFIG_SYS_BOOTCOUNT_LE in highbank
> - Enabled CONFIG_SYS_BOOTCOUNT_SINGLEWORD in highbank
>
> v2:
> - Added CONFIG_BOOTCOUNT_LE to bootcount_davinci.c and enabled it
> in calimain.h to select little-endian accessors.
>
> Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/cpu.c | 26 --------
> arch/arm/cpu/armv7/highbank/Makefile | 2 +-
> arch/arm/cpu/armv7/highbank/bootcount.c | 36 -----------
> arch/arm/cpu/ixp/cpu.c | 22 -------
> arch/blackfin/cpu/Makefile | 1 -
> arch/powerpc/lib/Makefile | 1 -
> board/enbw/enbw_cmc/enbw_cmc.c | 29 ---------
> board/keymile/km_arm/km_arm.c | 51 ---------------
> board/omicron/calimain/calimain.c | 29 ---------
> drivers/bootcount/Makefile | 45 ++++++++++++++
> .../powerpc/lib => drivers/bootcount}/bootcount.c | 25 ++++----
> drivers/bootcount/bootcount_at91.c | 43 +++++++++++++
> .../bootcount/bootcount_blackfin.c | 0
> drivers/bootcount/bootcount_davinci.c | 49 +++++++++++++++
> drivers/bootcount/bootcount_ram.c | 72
> ++++++++++++++++++++++
> include/bootcount.h | 51 +++++++++++++++
> include/configs/calimain.h | 1 +
> include/configs/enbw_cmc.h | 1 +
> include/configs/highbank.h | 2 +
> include/configs/km/km_arm.h | 2 +
> 21 files changed, 282 insertions(+), 207 deletions(-)
> delete mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c
> create mode 100644 drivers/bootcount/Makefile
> rename {arch/powerpc/lib => drivers/bootcount}/bootcount.c (82%)
> create mode 100644 drivers/bootcount/bootcount_at91.c
> rename arch/blackfin/cpu/bootcount.c =>
> drivers/bootcount/bootcount_blackfin.c (100%)
> create mode 100644 drivers/bootcount/bootcount_davinci.c
> create mode 100644 drivers/bootcount/bootcount_ram.c
> create mode 100644 include/bootcount.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Microsoft Multimedia:
You have nice graphics, sound and animations when the system crashes.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
