Dear Otavio Salvador, > This changes the board config to follow m28evk board configuration. > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > --- > board/freescale/mx28evk/mx28evk.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx28evk/mx28evk.c > b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 > --- a/board/freescale/mx28evk/mx28evk.c > +++ b/board/freescale/mx28evk/mx28evk.c > @@ -49,8 +49,8 @@ int board_early_init_f(void) > > /* SSP0 clock at 96MHz */ > mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); > - /* SSP2 clock at 96MHz */ > - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); > + /* SSP2 clock at 160MHz */ > + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
You _MUST_ also adjust the default SPI flash sleep, otherwise this is flat pointless change > #ifdef CONFIG_CMD_USB > mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
