On 22/08/2012 21:24, Matt Sealey wrote: > Allow usage of the imx-common/iomux-v3.h framework by including pad settings > for the i.MX51. The content of the file is taken from Linux kernel at > commit 5d23b39 plus the required changes to make it work in U-Boot. > > The contained pad settings are the minimum required to make an Efika MX boot > and get all the currently-implemented peripherals working in U-Boot. > > It is recommended that this file not be just a dumping ground for pins but > only contain the settings required for all the boards using it. > > Changes for v2: > * reference commit id from Linux kernel > * additionally roll in the USB pads > * removed GPIO_NUMBER define > > Signed-off-by: Matt Sealey <m...@genesi-usa.com> > ---
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
