On 22/08/2012 12:43, Dirk Behme wrote: > On 14.08.2012 14:52, Benoît Thébaudeau wrote: >> This can be useful for fuse-like hardware, OTP SoC options, etc. > > For i.MX6, I have a port of the OTP support from Freescale's U-Boot to > our mainline U-Boot in the queue [1]. > > As I don't have the overview over the various i.MXxx SoCs and don't > understand much of this patch below: Should this implement the same > functionality like my patch [1] for i.MX6?
I have not checked the details. but seeing the code it looks that the procedure to read / write are different. In this case, a further driver is ok. Anyway, you should take a look if your patches can be used on a mxs (MX28) device, because they should be closer. And then I will not like to have a driver for each SOC. Generally, I think we should use the approach of the common command and a specific fuse implementation. Then this API should be used by your patches as well. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
