On 22/08/2012 21:25, Matt Sealey wrote:
> * Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory
> * Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and
> mx6_efikamx to come
>
> Signed-off-by: Matt Sealey <m...@genesi-usa.com>
> ---
> board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 0
> .../mx51_efikamx}/imximage_mx.cfg | 0
> .../mx51_efikamx}/imximage_sb.cfg | 0
> boards.cfg | 4 ++--
> include/configs/{efikamx.h => mx51_efikamx.h} | 0
> 7 files changed, 3 insertions(+), 3 deletions(-)
> rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
> rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
>
> diff --git a/board/efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile
> similarity index 100%
> rename from board/efikamx/Makefile
> rename to board/genesi/mx51_efikamx/Makefile
> diff --git a/board/efikamx/efikamx-usb.c
> b/board/genesi/mx51_efikamx/efikamx-usb.c
> similarity index 99%
> rename from board/efikamx/efikamx-usb.c
> rename to board/genesi/mx51_efikamx/efikamx-usb.c
> index 618b39d..e9273d0 100644
> --- a/board/efikamx/efikamx-usb.c
> +++ b/board/genesi/mx51_efikamx/efikamx-usb.c
> @@ -33,7 +33,7 @@
> #include <usb/ulpi.h>
> #include <errno.h>
>
> -#include "../../drivers/usb/host/ehci.h"
> +#include "../../../drivers/usb/host/ehci.h"
>
> /* USB pin configuration */
> #define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
> diff --git a/board/efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
> similarity index 100%
> rename from board/efikamx/efikamx.c
> rename to board/genesi/mx51_efikamx/efikamx.c
> diff --git a/board/efikamx/imximage_mx.cfg
> b/board/genesi/mx51_efikamx/imximage_mx.cfg
> similarity index 100%
> rename from board/efikamx/imximage_mx.cfg
> rename to board/genesi/mx51_efikamx/imximage_mx.cfg
> diff --git a/board/efikamx/imximage_sb.cfg
> b/board/genesi/mx51_efikamx/imximage_sb.cfg
> similarity index 100%
> rename from board/efikamx/imximage_sb.cfg
> rename to board/genesi/mx51_efikamx/imximage_sb.cfg
> diff --git a/boards.cfg b/boards.cfg
> index edd750c..a9ec44b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -215,8 +215,8 @@ integratorcp_cm946es arm arm946es
> integrator armltd
> ca9x4_ct_vxp arm armv7 vexpress
> armltd
> am335x_evm arm armv7 am335x ti
> am33xx
> highbank arm armv7 highbank -
> highbank
> -efikamx arm armv7 efikamx -
> mx5
> efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
> -efikasb arm armv7 efikamx -
> mx5
> efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
> +mx51_efikamx arm armv7 mx51_efikamx
> genesi mx5
> mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
> +mx51_efikasb arm armv7 mx51_efikamx
> genesi mx5
> mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
> mx51evk arm armv7 mx51evk
> freescale mx5
> mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
> mx53ard arm armv7 mx53ard
> freescale mx5
> mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
> mx53evk arm armv7 mx53evk
> freescale mx5
> mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
> diff --git a/include/configs/efikamx.h b/include/configs/mx51_efikamx.h
> similarity index 100%
> rename from include/configs/efikamx.h
> rename to include/configs/mx51_efikamx.h
>
It is fine with me.
Acked-by: Stefano Babic <sba...@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
