Am Montag, den 20.08.2012, 15:27 +0300 schrieb Igor Grinberg: > > On 08/19/12 19:08, Lucas Stach wrote: > > With this series we are able to initialize USB controllers > > using an external ULPI phy AKA USB2 on Tegra 2 devices. > > > > This was tested to work on a Toradex Colibri T20 board, > > where USB2 is used to access the ASIX ethernet chipset. > > Testing was done with "tegra20: usb: rework set_host_mode" > > I'm sorry, I have missed this patch. > Can you please give us a reference to it? > It has nothing to do with this series per se, it is only needed on the Colibri board as VBus enable there is not done using the ULPI phy, but a separate GPIO from the Tegra SoC.
But yes, I'll include a reference when reposting. > > applied. I did not spot any regressions on the UTMI ports. > > > > Patchset is based on top of u-boot-tegra/next > > > > Lucas Stach (3): > > tegra20: complete periph_id enum > > tegra20: add clock_set_pllout function > > tegra20: add USB ULPI init code > > > > arch/arm/cpu/armv7/tegra20/usb.c | 131 > > +++++++++++++++++++++++++--- > > arch/arm/cpu/tegra20-common/clock.c | 26 ++++++ > > arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +- > > arch/arm/include/asm/arch-tegra20/clk_rst.h | 11 ++- > > arch/arm/include/asm/arch-tegra20/clock.h | 25 ++++++ > > arch/arm/include/asm/arch-tegra20/usb.h | 29 ++++-- > > 6 Dateien geändert, 206 Zeilen hinzugefügt(+), 18 Zeilen entfernt(-) > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
