On Fri Aug 10, 2012 at 02:15:20AM +0530, Sughosh Ganu wrote: > Also enable the ohci port on hawkboard. These additions result in an > increased u-boot size -- adjust the same accordingly in the board's > config. > > Move the usb header for da8xx platforms under arch-davinci. > > Signed-off-by: Sughosh Ganu <urwithsugh...@gmail.com> > --- > arch/arm/cpu/arm926ejs/davinci/psc.c | 5 ++ > .../arm/include/asm/arch-davinci/da8xx-usb.h | 7 ++- > arch/arm/include/asm/arch-davinci/hardware.h | 1 + > board/davinci/da8xxevm/hawkboard.c | 41 +++++++++++++++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ohci-da8xx.c | 48 > ++++++++++++++++++++ > drivers/usb/musb/da8xx.c | 3 +- > include/configs/hawkboard.h | 14 +++++- > 8 files changed, 116 insertions(+), 4 deletions(-) > rename drivers/usb/musb/da8xx.h => > arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%) > create mode 100644 drivers/usb/host/ohci-da8xx.c
Tom, do you have any comments on this patch. If not, can this be applied. -sughosh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
