> -----Original Message-----
> From: u-boot-boun...@lists.denx.de [mailto:u-boot-
> boun...@lists.denx.de] On Behalf Of Albert ARIBAUD
> Sent: 16 August 2012 23:39
> To: u-boot@lists.denx.de
> Subject: [U-Boot] [PATCH] ARM: lacie_kw: add support for
> WIRELESS_SPACE
>
>
> Signed-off-by: Albert ARIBAUD <albert.u.b...@aribaud.net>
> ---
>
> This patch adds the Wireless Space to the lacie_kw sub-targets.
> It *should* not change a thing to the already existing sub-targets
> (except that each one gets its own prompt).
>
> Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test.
>
> board/LaCie/netspace_v2/netspace_v2.c | 42 ++----------
> board/LaCie/netspace_v2/netspace_v2.h | 121
> +++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> drivers/net/mvgbe.c | 10 ++-
It would be good if you split the patch, to me the change to above file is
generic, which is your dependency.
> include/configs/lacie_kw.h | 38 ++++++++++-
> 5 files changed, 175 insertions(+), 37 deletions(-)
>
...snip...
> diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
> index c35c2db..a979ab4 100644
> --- a/include/configs/lacie_kw.h
> +++ b/include/configs/lacie_kw.h
> @@ -33,6 +33,10 @@
> #elif defined(CONFIG_NET2BIG_V2)
> #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
> #define CONFIG_IDENT_STRING " 2Big v2"
> +#elif defined(CONFIG_WIRELESS_SPACE)
> +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h
> */
> +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
> +#define CONFIG_IDENT_STRING " Wireless Space"
> #else
> #error "Unknown board"
> #endif
> @@ -73,6 +77,12 @@
> #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-
> is2.cfg
> #endif
>
> +#ifdef CONFIG_WIRELESS_SPACE
> +/* No SPI but NAND */
> +#undef CONFIG_CMD_SF
> +#define CONFIG_CMD_NAND
> +#endif
> +
> /*
> * mv-common.h should be defined after CMD configs since it used them
> * to enable certain macros
> @@ -90,8 +100,14 @@
> #define CONFIG_SYS_IDE_MAXDEVICE 1
> #if defined(CONFIG_NET2BIG_V2)
> #define CONFIG_SYS_PROMPT "2big2> "
> -#else
> +#elif defined(CONFIG_NETSPACE_V2)
> #define CONFIG_SYS_PROMPT "ns2> "
> +#elif defined(CONFIG_INETSPACE_V2)
> +#define CONFIG_SYS_PROMPT "is2> "
> +#elif defined(CONFIG_WIRELESS_SPACE)
> +#define CONFIG_SYS_PROMPT "ws> "
> +#else
> +#define CONFIG_SYS_PROMPT "lacie-kw> "
> #endif
>
> /*
> @@ -99,7 +115,16 @@
> */
> #ifdef CONFIG_CMD_NET
> #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC
> address */
> +#if defined(CONFIG_WIRELESS_SPACE)
> +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports only */
> +#define CONFIG_EGIGA1_PHY 0x6 /* egiga1 has a PHY,
> egiga0
> has NOT */
> +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6}
> +#define CONFIG_MII
> +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
> +#else
> #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
> +#define CONFIG_EGIGA0_PHY 0x8
> +#endif
> #define CONFIG_NETCONSOLE
> #endif
>
> @@ -154,11 +179,20 @@
> /*
> * Environment variables configurations
> */
> +
> +#if defined(CONFIG_WIRELESS_SPACE)
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
> +#define CONFIG_ENV_SIZE 0x1000 /* 4KB */
> +#define CONFIG_ENV_ADDR 0x70000
> +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
> +#else
> #define CONFIG_ENV_IS_IN_SPI_FLASH
> #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
> #define CONFIG_ENV_SIZE 0x1000 /* 4KB */
> #define CONFIG_ENV_ADDR 0x70000
> #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
> +#endif
>
> /*
> * Default environment variables
> @@ -185,4 +219,6 @@
> "usbload=usb start && " \
> "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
>
> +//#define DEBUG
Either remove it or make it c-style comments.
Regards...
Prafulla . . .
> +
> #endif /* _CONFIG_LACIE_KW_H */
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
