> -----Original Message----- > From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] > Sent: 16 August 2012 16:47 > To: u-boot@lists.denx.de > Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar; Joe > Hershberger > Subject: [PATCH] net/phy: support the mv88e6352 switch > > This patch add support for the configuration of an external switch > from > the 88E6xxx series from Marvell trough an MDIO link using indirect > adressing. This can be used if we do not want to use an EEPROM for the > configuration. > > This driver is not generic and was not tested on other switches than > the > 88e6352. This is proposed as a first implementation that is somewhat > limited but works and that can be used as a basis for further > developments for this switch family. > > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > cc: Holger Brunck <holger.bru...@keymile.com> > cc: Prafulla Wadaskar <prafu...@marvell.com> > cc: Joe Hershberger <joe.hershber...@gmail.com> > --- > drivers/net/phy/Makefile | 1 + > drivers/net/phy/mv88e6352.c | 318 > +++++++++++++++++++++++++++++++++++++++++++ > include/mv88e6352.h | 92 +++++++++++++ > 3 files changed, 411 insertions(+), 0 deletions(-) > create mode 100644 drivers/net/phy/mv88e6352.c > create mode 100644 include/mv88e6352.h
Hi Valentin I do not have any specific feedback for this patch, To me this looks okay. Joe may pull it if he finds everything okay. Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
