Hi Andreas,
On 8/16/2012 12:44, Bo Shen wrote:
This series patches enable at91sam9x5 boot from serial flash
Bo Shen (3):
spi: add atmel at25db321 serial flash support
arm : at91sam9x5 : enable serial flash boot
arm : at91sam9x5 : make nand available when not boot from nand
Please don't take this serial patches.
I found the spi only works at 1MHz speed which is too slow.
I will resend it let it work at a higher speed.
BRs,
Bo Shen
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 4 ++--
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 ++
boards.cfg | 1 +
drivers/mtd/spi/atmel.c | 10 ++++++++++
include/configs/at91sam9x5ek.h | 18 ++++++++++++++----
5 files changed, 29 insertions(+), 6 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
