Dear Benoît Thébaudeau,
> Hi Ilya,
>
> On Fri, Aug 10, 2012 at 8:34:14 PM, Ilya Yanok wrote:
> > Hi Benoit,
> >
> > On Fri, Aug 10, 2012 at 8:23 PM, Benoît Thébaudeau <
> >
> > benoit.thebaud...@advansee.com > wrote:
> > > diff --git u-boot-usb-4f8254e.orig/common/usb_storage.c
> > > u-boot-usb-4f8254e/common/usb_storage.c
> > >
> > > index 0cd6399..822bd64 100644
> > >
> > > --- u-boot-usb-4f8254e.orig/common/usb_storage.c
> > >
> > > +++ u-boot-usb-4f8254e/common/usb_storage.c
> > >
> > > @@ -157,12 +157,13 @@ struct us_data {
> > >
> > >
> > > #ifdef CONFIG_USB_EHCI
> > >
> > > /*
> > >
> > > - * The U-Boot EHCI driver cannot handle more than 5 page aligned
> > > buffers
> > >
> > > - * of 4096 bytes in a transfer without running itself out of
> > > qt_buffers
> > >
> > > + * The U-Boot EHCI driver can handle any transfer length as long
> > > as
> > > there is
> > >
> > > + * enough free heap space left, but the SCSI READ(10) and
> > > WRITE(10)
> > > commands are
> > >
> > > + * limited to 65535 bytes.
> >
> > bytes?
> >
> > > */
> > >
> > > -#define USB_MAX_XFER_BLK(start, blksz) (((4096 * 5) - (start %
> > > 4096)) / blksz)
> > >
> > > +#define USB_MAX_XFER_BLK 65535
> >
> > But here you limit it to 65535 _blocks_, right? One of the two should
> > be wrong ;)
>
> Argh, it was a typo in the comment. Thanks for catching this. I meant
> "blocks" of course. Marek, can you fix this comment on-the-fly when
> applying?
Roger, will do!
> Best regards,
> Benoît
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
