All,
I enabled my U-boot for NAND support for my imx28EVK and I get
the following error when U-Boot starts:
NAND: MXS NAND: Error sending command
MXS NAND: Error sending command
MXS NAND: DMA read error
MXS NAND: DMA read error
MXS NAND: Error sending command
...
I am using U-boot version U-Boot 2012.07-rc1. I also have the
NAND support enabled in /include/configs/mx28evk.h by adding
CONFIG_CMD_NAND.
The NAND chip I am using is: Micron MT29F1G08ABADA.
Thanks,
Bill
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
