On Tue, Jul 31, 2012 at 1:25 PM, Fabio Estevam <feste...@gmail.com> wrote: > Hi, > > Just tried 2012.07 on a mx53loco and this is what I got: > > U-Boot 2012.07 (Jul 31 2012 - 15:21:51) > > Board: MX53 LOCO > I2C: ready > DRAM: 1 GiB > WARNING: Caches not enabled > CPU: Freescale i.MX53 family rev2.0 at 1000 MHz > Reset cause: POR > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > > (Hangs here) > > Have anyone else seen this? I will start debugging it, and any > suggestions are welcome.
It's actually not hanging up, if you have a boot script, it seems to runs that just fine, but it will not print it to the serial terminal.. This would seem to redirect the prompt the lcd? http://git.denx.de/?p=u-boot.git;a=commit;h=f714b0a911e24cc733553f02b30d508212f339fe before that commit i was using "4398d55" with no issues.. mx53loco-r U-Boot 2012.07-00007-g7395c76 (Jul 31 2012 - 11:29:17) Board: MX53 LOCO I2C: ready DRAM: 1 GiB WARNING: Caches not enabled CPU: Freescale i.MX53 family rev2.1 at 1000 MHz Reset cause: WDOG MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment Uncompressing Linux... done, booting the kernel.... Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
