On 07/31/2012 01:33 AM, R, Sricharan wrote: > Hi Tom, > [snip..] >> diff --git a/arch/arm/include/asm/arch-omap5/omap.h >> b/arch/arm/include/asm/arch-omap5/omap.h >> index 7f05cb5..c697e0b 100644 >> --- a/arch/arm/include/asm/arch-omap5/omap.h >> +++ b/arch/arm/include/asm/arch-omap5/omap.h >> @@ -39,11 +39,6 @@ >> #define OMAP54XX_L4_WKUP_BASE 0x4Ae00000 >> #define OMAP54XX_L4_PER_BASE 0x48000000 >> >> -#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000 >> -#define OMAP54XX_DRAM_ADDR_SPACE_END 0xFFFFFFFF >> -#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START >> -#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END >> - > This is a problem for OMAP5, which has a trap section at 0xFF000000 > with in the sdram boundary. OMAP5 evm board has 2GB of memory from > 0x80000000 - 0xFFFFFFFF. Size of the trap section should not be > included in the > total sdram size.
But it's not sdram size. What happens when you're executing at the trap section, or rather, where are you executing code from? -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
