I submitted this a while ago[0], it would be nice to see it included if possible. It generalises the DNS325 support so that it can be used for both the DNS320 and DNS325.
Luka Perkov stated "I have no more questions regarding this patch", not sure if this counts as an ACK. The patch here is ~same, just rebased. Somewhat related, I have tried using tools/kwboot to boot both NASes. The DNS325 boots fine, however the DNS320 reports:- Sending boot message. Please reboot the target...| Sending boot image... 0 % [+++++++++++++++++xmodem: Bad message UART-boot works with kwuartboot, although only when it is killed and restarted. If I work out anything interesting will follow it up in a separate thread. Any feedback appreciated! [0] http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/130234/focus=130575 Jamie Lentin (2): kirkwood: Rename dns325 to dnskw kirkwood: Add support for the D-Link DNS-320 MAINTAINERS | 4 + board/d-link/{dns325 => dnskw}/Makefile | 2 +- board/d-link/{dns325/dns325.c => dnskw/dnskw.c} | 18 +- board/d-link/{dns325/dns325.h => dnskw/dnskw.h} | 30 ++- board/d-link/dnskw/kwbimage.dns320.cfg | 207 ++++++++++++++++++++ .../kwbimage.cfg => dnskw/kwbimage.dns325.cfg} | 0 boards.cfg | 3 +- include/configs/{dns325.h => dnskw.h} | 21 +- 8 files changed, 261 insertions(+), 24 deletions(-) rename board/d-link/{dns325 => dnskw}/Makefile (98%) rename board/d-link/{dns325/dns325.c => dnskw/dnskw.c} (90%) rename board/d-link/{dns325/dns325.h => dnskw/dnskw.h} (65%) create mode 100644 board/d-link/dnskw/kwbimage.dns320.cfg rename board/d-link/{dns325/kwbimage.cfg => dnskw/kwbimage.dns325.cfg} (100%) rename include/configs/{dns325.h => dnskw.h} (89%) -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
