Instead of clearing 2 bits, all the other
bits were set because '|=' was used instead
of '&='.
Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
Acked-by: Marek Vasut <ma...@denx.de>
Acked-by: Stefano Babic <sba...@denx.de>
---
V2: add acks
V3: rename toggle to idle_bus in patches 17,18,24
and a rebase
Heiko, can you take 1-19 if no comments
Stefano, can you take 20-23
24 and 25 will wait until both sets are in same tree
---
drivers/i2c/mxc_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index fc68062..c0c45fd 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -264,7 +264,7 @@ void i2c_imx_stop(void)
/* Stop I2C transaction */
temp = readb(&i2c_regs->i2cr);
- temp |= ~(I2CR_MSTA | I2CR_MTX);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, &i2c_regs->i2cr);
i2c_imx_bus_busy(0);
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
