[U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization

[Otavio Salvador]

The mx28 prefix has been added to the initialization data and function
so it is clear by which SoC it is used as i.MX233 will have a specific
one.

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---
 arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c 
b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
index e17a4d7..7317a97 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
@@ -31,7 +31,7 @@
 
 #include "mx28_init.h"
 
-uint32_t dram_vals[] = {
+uint32_t mx28_dram_vals[] = {
        0x00000000, 0x00000000, 0x00000000, 0x00000000,
        0x00000000, 0x00000000, 0x00000000, 0x00000000,
        0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -88,14 +88,14 @@ void __mx28_adjust_memory_params(uint32_t *dram_vals)
 void mx28_adjust_memory_params(uint32_t *dram_vals)
        __attribute__((weak, alias("__mx28_adjust_memory_params")));
 
-void init_m28_200mhz_ddr2(void)
+void init_mx28_200mhz_ddr2(void)
 {
        int i;
 
-       mx28_adjust_memory_params(dram_vals);
+       mx28_adjust_memory_params(mx28_dram_vals);
 
-       for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
-               writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+       for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++)
+               writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i));
 }
 
 void mx28_mem_init_clock(void)
@@ -230,7 +230,7 @@ void mx28_mem_init(void)
        /* Clear START bit from DRAM_CTL16 */
        clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
 
-       init_m28_200mhz_ddr2();
+       init_mx28_200mhz_ddr2();
 
        /* Clear SREFRESH bit from DRAM_CTL17 */
        clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
-- 
1.7.10.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot