Move or_asynclistaddr programming to ehci_submit_async()
function to make sure queue head is properly programmed
before every transfer. This solves the problem with changing
qh address.
Also remove unneeded qh_list->qh_link reprogramming at the
end of transfer.
Signed-off-by: Ilya Yanok <ilya.ya...@cogentembedded.com>
---
drivers/usb/host/ehci-hcd.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 04300be..3be2a77 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -348,6 +348,9 @@ ehci_submit_async(struct usb_device *dev, unsigned long
pipe, void *buffer,
flush_dcache_range((uint32_t)&qh, (uint32_t)&qh + sizeof(struct QH));
flush_dcache_range((uint32_t)qtd, (uint32_t)qtd + sizeof(qtd));
+ /* Set async. queue head pointer. */
+ ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list);
+
usbsts = ehci_readl(&hcor->or_usbsts);
ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
@@ -403,8 +406,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long
pipe, void *buffer,
goto fail;
}
- qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
-
token = hc32_to_cpu(qh.qh_overlay.qt_token);
if (!(token & 0x80)) {
debug("TOKEN=%#x\n", token);
@@ -741,9 +742,6 @@ int usb_lowlevel_init(void)
qh_list.qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list.qh_overlay.qt_token = cpu_to_hc32(0x40);
- /* Set async. queue head pointer. */
- ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list);
-
reg = ehci_readl(&hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
