V2:
1. Modify the type of return for s3c64xx_get_base_nand
2. Add patch 0014 to support s3c6410 board
3. Adjust patch for mix content.
V1:
This serial patch intent to:
1. Switch all I/O to use readl/writel function
2. Change nand_spl to use SPL framework
3. S3C64XX serial includes s3c6400 and s3c6410,
Here seprate cpu and board file to support to board's of s3c6410.
I test this patch on my s3c6410 development board. the log as following:
U-Boot 2012.04.01-10905-g9fa0c77 (Jul 07 2012 - 15:50:57) for SMDK6400
CPU: S3C64XX@532MHz
Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode)
Board: DMATEK6410
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dm9000
Hit any key to stop autoboot: 0
DMATEK6410 #
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
