Hi Tom, On Mon, 9 Jul 2012 10:49:34 -0700, Tom Warren <twarren.nvi...@gmail.com> wrote: > Albert, > > Please pull u-boot-tegra/master into ARM master. Thanks! > > The following changes since commit 58e22f8a15adec39d24d060180d76a4cbe86a04b: > Stephen Warren (1): > fdt: send all dtc output to stderr > > are available in the git repository at: > > git://git.denx.de/u-boot-tegra master > > Jim Lin (1): > tegra: usb: Fix device enumeration problem of USB1 > > Lucas Stach (2): > tegra: add ULPI on USB2 funcmux entry > tegra: usb: fix wrong error check > > Stephen Warren (10): > Add env vars describing U-Boot target board > tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG > tegra: add enterrcm command > tegra: bootcmd enhancements > tegra: bootcmd: start USB only when needed > tegra: add GMC/GMD funcmux entry for SFLASH > tegra: add pin_mux_spi() board initialization function > tegra: trimslice: set up serial flash pinmux > tegra: enable bootz command > tegra: define fdt_load/fdt_high variables > > Thierry Reding (7): > tegra: Rework Tamonten support > tegra: medcom: Add device tree support > tegra: plutux: Add device tree support > tegra: Allow boards to perform early GPIO setup > tegra: Implement gpio_early_init() on Tamonten > tegra: Use SD write-protect GPIO on Tamonten > tegra: Add Tamonten Evaluation Carrier support > > Tom Warren (1): > tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches > > MAINTAINERS | 1 + > README | 14 ++++ > arch/arm/cpu/armv7/tegra2/Makefile | 1 + > arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c | 65 +++++++++++++++++++ > arch/arm/cpu/armv7/tegra2/funcmux.c | 23 ++++++- > arch/arm/cpu/armv7/tegra2/usb.c | 2 +- > arch/arm/include/asm/arch-tegra2/funcmux.h | 6 ++ > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + > board/avionic-design/common/tamonten.c | 65 ++++++------------- > board/avionic-design/common/tamonten.h | 32 --------- > board/avionic-design/dts/tegra2-medcom.dts | 58 +++++++++++++++++ > board/avionic-design/dts/tegra2-plutux.dts | 58 +++++++++++++++++ > board/avionic-design/dts/tegra2-tec.dts | 58 +++++++++++++++++ > board/avionic-design/medcom/Makefile | 6 +- > board/avionic-design/medcom/medcom.c | 45 ------------- > board/avionic-design/plutux/Makefile | 6 +- > board/avionic-design/plutux/plutux.c | 45 ------------- > board/avionic-design/tec/Makefile | 50 ++++++++++++++ > board/compal/paz00/paz00.c | 4 +- > board/compulab/trimslice/trimslice.c | 7 ++- > board/nvidia/common/board.c | 16 ++++- > board/nvidia/common/board.h | 1 + > boards.cfg | 1 + > common/env_common.c | 11 +++ > common/env_embedded.c | 11 +++ > drivers/usb/host/ehci-tegra.c | 18 +++++- > include/configs/medcom.h | 21 ++++++- > include/configs/plutux.h | 21 ++++++- > include/configs/tec.h | 82 ++++++++++++++++++++++++ > include/configs/tegra2-common-post.h | 96 ++++++++++++++++++--------- > include/configs/tegra2-common.h | 3 + > mkconfig | 8 ++ > 32 files changed, 622 insertions(+), 214 deletions(-) > create mode 100644 arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c > delete mode 100644 board/avionic-design/common/tamonten.h > create mode 100644 board/avionic-design/dts/tegra2-medcom.dts > create mode 100644 board/avionic-design/dts/tegra2-plutux.dts > create mode 100644 board/avionic-design/dts/tegra2-tec.dts > delete mode 100644 board/avionic-design/medcom/medcom.c > delete mode 100644 board/avionic-design/plutux/plutux.c > create mode 100644 board/avionic-design/tec/Makefile > create mode 100644 include/configs/tec.h
Applied to u-boot-arm/master, thanks. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
