follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) of
OMAP-L138 DSP+ARM Processor Technical Reference Manual
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevets...@gmail.com>
Acked-by: Christian Riesch <christian.rie...@omicron.at>
Tested-by: Christian Riesch <christian.rie...@omicron.at>
---
Change for v3:
* split DDR and UART bugfixes to separate patch series (series 1/3)
Change for v2:
* fix checkpatch warnings
---
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +++++++++++++++++------
arch/arm/include/asm/arch-davinci/hardware.h | 1 +
2 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index df7d6a2..ff2e2e3 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -190,13 +190,21 @@ int da850_ddr_setup(void)
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
}
-
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
- clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
- (1 << DDR_SLEW_CMOSEN_BIT));
+
+ if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
+ /* DDR2 */
+ clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_DDR_PDENA_BIT) |
+ (1 << DDR_SLEW_CMOSEN_BIT));
+ } else {
+ /* MOBILE DDR */
+ setbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_DDR_PDENA_BIT) |
+ (1 << DDR_SLEW_CMOSEN_BIT));
+ }
/*
* SDRAM Configuration Register (SDCR):
@@ -216,7 +224,11 @@ int da850_ddr_setup(void)
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
/* write memory configuration and timing */
- writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+ if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
+ /* MOBILE DDR only*/
+ writel(CONFIG_SYS_DA850_DDR2_SDBCR2,
+ &dv_ddr2_regs_ctrl->sdbcr2);
+ }
writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
@@ -240,7 +252,7 @@ int da850_ddr_setup(void)
/* disable self refresh */
clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
- DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
+ DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
return 0;
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h
b/arch/arm/include/asm/arch-davinci/hardware.h
index b145c6e..56e5743 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -505,6 +505,7 @@ struct davinci_syscfg1_regs {
((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE)
#define DDR_SLEW_CMOSEN_BIT 4
+#define DDR_SLEW_DDR_PDENA_BIT 5
#define VTP_POWERDWN (1 << 6)
#define VTP_LOCK (1 << 7)
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
