Hello, The following changes since commit d702b0811df53a1fc2d8049e35431e4591d093c6:
ARM: cache: Move the cp15 CR register read before flushing the cache.
(2012-07-07 14:07:44 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti next
for you to fetch changes up to 9af1a780c81639ca4b6f7035530dc8c7151bf201:
omap: am335x_evm: enable i2c1 channel (2012-07-09 11:12:19 -0700)
----------------------------------------------------------------
Igor Grinberg (1):
arm: omap3: cm-t35: minor comment and printf change
Ilya Yanok (1):
omap24xx_i2c: add 2-byte address support
Javier Martinez Canillas (2):
igep00x0: default to OMAP-specific serial driver
igep00x0: default mmcrootfstype to EXT4
Lad, Prabhakar (7):
da850/omap-l138: Add MMC support for DA850/OMAP-L138
arm, davinci: perform check for initializing global data and serial init
da850/omap-l138: Define SPI specific configs for SPL only when SPI is used
da850/omap-l138: Add support to read u-boot image from MMC/SD
da850/omap-l138: Fix NAND flash timings
da850/omap-l138: Add support for NAND SPL
da850/omap-l138: add support for direct NOR boot mode
Peter Meerwald (4):
beagle: add eeprom expansion board info for bct brettl4
beagle: make get_expansion_id(), get_board_revision(),
beagle_display_init() static
beagle: fix termination of buddy env setting
beagle: removed unused pr_debug #define
Rajashekhara, Sudhakar (2):
da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
da850/omap-l138: Make MMC and NOR support mutually exclusive
Stefano Babic (4):
mcx: increased buffer for command line
OMAP3: mcx: set pinmux for uart4
OMAP3: mcx: updated default environment
OMAP3: mcx: read hot-water-button after reset
Steve Sakoman (3):
omap: am335x_evm: remove unused definitions
omap: am33xx: enable gpio support
omap: am335x_evm: enable i2c1 channel
Sughosh Ganu (1):
hawkboard/omapl-138: Add support for generating ais image for hawkboard
.gitignore | 3 +
Makefile | 5 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 11 ++
arch/arm/cpu/arm926ejs/davinci/spl.c | 20 ++--
arch/arm/cpu/armv7/am33xx/board.c | 10 ++
arch/arm/cpu/armv7/am33xx/clock.c | 20 ++++
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 20 ++++
arch/arm/include/asm/arch-am33xx/gpio.h | 29 +++++
arch/arm/include/asm/arch-davinci/hardware.h | 1 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +
board/cm_t35/cm_t35.c | 4 +-
board/davinci/da8xxevm/da850evm.c | 54 ++++++++--
board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
board/htkw/mcx/mcx.c | 23 ++++
board/htkw/mcx/mcx.h | 11 +-
board/ti/am335x/evm.c | 6 +-
board/ti/am335x/mux.c | 13 +++
board/ti/beagle/beagle.c | 16 +--
boards.cfg | 1 +
drivers/i2c/omap24xx_i2c.c | 58 +++++-----
drivers/mmc/Makefile | 4 +
drivers/mmc/spl_mmc_load.c | 62 +++++++++++
include/configs/am335x_evm.h | 2 +-
include/configs/da850evm.h | 93 ++++++++++++++--
include/configs/hawkboard.h | 1 +
include/configs/igep00x0.h | 4 +-
include/configs/mcx.h | 132 ++++++++++++++++-------
include/configs/omap3_beagle.h | 2 +-
include/mmc.h | 2 +
30 files changed, 502 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/include/asm/arch-am33xx/gpio.h
create mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg
create mode 100644 drivers/mmc/spl_mmc_load.c
This includes the single patch I asked for in u-boot-ti/master as well
as a number of other small clean-ups, bugfixes or enhancements that have
been around for a bit, but did not meet the merge window and I don't
want to forget them. If you want me to carry them in my own /next
branch until -rc1 comes out, that's fine and this can just serve as
notice to interested parties that yes, really, patches have been picked
up.
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
