Dear Timur Tabi,
> Now that phy_startup() can return an actual error code, check for that
> error code and abort network initialization if the PHY fails.
>
> Signed-off-by: Timur Tabi <ti...@freescale.com>
> ---
> drivers/net/fec_mxc.c | 7 ++++++-
> drivers/net/fm/eth.c | 9 ++++++++-
> drivers/net/sh_eth.c | 6 +++++-
> drivers/net/tsec.c | 8 +++++++-
> drivers/net/xilinx_axi_emac.c | 6 +++++-
> drivers/net/xilinx_ll_temac.c | 8 +++++++-
> 6 files changed, 38 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index eee41d7..e62ae61 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -510,7 +510,12 @@ static int fec_open(struct eth_device *edev)
> fec_eth_phy_config(edev);
> if (fec->phydev) {
> /* Start up the PHY */
> - phy_startup(fec->phydev);
> + int ret = phy_startup(fec->phydev);
> + if (ret) {
> + printf("Could not initialize PHY %s\n",
> + fec->phydev->dev->name);
> + return ret;
> + }
> speed = fec->phydev->speed;
> } else {
> speed = _100BASET;
For the FEC
Reviewed-by: Marek Vasut <ma...@denx.de>
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
