Hi Albert, On Thu, 5 Jul 2012 11:36:55 +0200, Albert ARIBAUD <albert.u.b...@aribaud.net> wrote: > Hi Albert, > > On Thu, 5 Jul 2012 10:35:59 +0200, Albert ARIBAUD > <albert.u.b...@aribaud.net> wrote: > > Hi Andreas, > > > > On Tue, 3 Jul 2012 00:14:58 +0200, Andreas Bießmann > > <andreas.de...@googlemail.com> wrote: > > > Dear Albert Aribaud, > > > > > > The following changes since commit > > > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: > > > > > > EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 > > > +0200) > > > > > > are available in the git repository at: > > > > > > git://git.denx.de/u-boot-atmel.git master > > > > > > for you to fetch changes up to > > > f3f68232e709a1108b631410087d526cc23dfb55: > > > > > > AT91SAM9*: Change kernel address in dataflash to match u-boot's > > > size (2012-07-02 22:15:05 +0200) > > > > > > ---------------------------------------------------------------- > > > Alexandre Belloni (1): > > > AT91SAM9*: Change kernel address in dataflash to match > > > u-boot's size > > > > > > Andreas Bießmann (1): > > > ehci-atmel: fix compiler warning > > > > > > Bo Shen (3): > > > Atmel : usb : add EHCI driver for Atmel SoC > > > AT91: at91sam9m10g45ek : Enable EHCI instead OHCI > > > ATMEL/PIO: Enable new feature of PIO on Atmel device > > > > > > e...@bus-elektronik.de (2): > > > Fix: brocken boot message at serial line on AT91SAM9263-EK > > > board Fix: AT91SAM9263 nor flash usage > > > > Can you just fix the "brocken" typo above? (and then rebase to > > current arm/master, should be trivial, was on my side) > > Please hold on: I had a misconfigured e-mail in my new git setup, so > my current u-boot-arm tree is not ueasble. I'll send out a notice when > the tree is fixed.
Luckily, I had not pushed any change with the wrong e-mail address on the official ARM tree, so all is fine. Please proceed with fixing and rebasing. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
