The Micrel KSZ8695 is a SoC with an ARM922T processor, NOR or ROM booting, and SDRAM support. It has been used in a couple of Opengear products and some of that u-boot version has been contributed upstream, but apparently not been maintained since.
The three patches submitted here are intended to remedy that. With all three combined, I have been able to get Micrel's KSZ8695X demo board to run U-Boot. As this is my first attempt at a contribution upstream to U-Boot, any comments are quite welcome. Yann Vernier (3): cm4008: set gd->ram_size in dram_init cm4008: Fix ROM relocation. cm4008: use common cfi_flash support arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 9 +++++++-- board/cm4008/Makefile | 2 +- board/cm4008/cm4008.c | 3 +-- board/cm4008/config.mk | 1 - include/configs/cm4008.h | 7 +++++++ 5 files changed, 16 insertions(+), 6 deletions(-) delete mode 100644 board/cm4008/config.mk -- 1.7.10 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
