Hi Sughosh, On Thu, Jul 5, 2012 at 12:18 PM, Sughosh Ganu <urwithsugh...@gmail.com> wrote: > hi Graeme, > On Wed Jul 04, 2012 at 09:28:07AM +1000, Graeme Russ wrote: > > <snip> > >> >> On Mon, Jul 2, 2012 at 9:24 PM, Sughosh Ganu <urwithsugh...@gmail.com> >> >> wrote: >> >> > hi, >> >> > While testing on hawkboard with the latest commit, i hit an issue of >> >> > commands not being accepted. >> >> > >> >> > hawkboard > rese >> >> > Unknown command '�����' - try 'help' >> >> > hawkboard > >> >> > >> >> > Running git bisect showed that this is caused due to commit >> >> > 054ea170f271: >> >> > cmd_mem: cmp: unify size code paths. Has anyone seen this issue -- i >> >> don't >> >> > think this is board/arch specific. >> >>
Tested on Logic Pd's OMAPL138, and found no issues as you mentioned. Thx, --Prabhakar Lad >> >> I tried to reproduce this on the calimain board (AM1808 SoC), but >> >> without success. The reset command works fine with current mainline >> >> u-boot. >> >> >> > >> > Thanks for testing this. This looks to be some kind of an alignment issue >> > on my board, which is getting introduced due to the commit i mentioned. The >> > said commit is not directly responsible for the problem, but it introduces >> > some kind of misalignment. I am looking into this -- at such times i so >> > dearly wish i had a jtag debugger :) >> >> I may be totally off track, but I saw a patch recently 'arm: armv7: >> add compile option -mno-unaligned-access if available' - I wonder if >> its related > > The SoC on my board uses a armv5 based core(arm926ejs), so this > patch won't apply for my board. > > -sughosh > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
