On Sun, Jul 1, 2012 at 9:53 PM, Heiko Schocher <h...@denx.de> wrote: > Hello Tom, > > On 15.05.2012 08:24, Heiko Schocher wrote: >> >> - change gpio pin settings: >> >> - gpio pin 6[13] (PLC reset) default value low >> - gpio pin 6[0] (TPM reset) default value low >> - 4 new GPIO pins >> pin i/o name >> - 3[9] input Board Type >> - 2[7] input HW-ID0 >> - 2[6] input HW-ID1 >> - 2[3] input HW-ID2 >> >> - read board type and hw id from gpio pins on the enbw_cmc board, >> and use board type for setting up different gpio pin settings. >> >> - do not pass "davinci_mmc.use_dma=0" to linux, as MMC now >> works with DMA. >> >> - update logbuf support: >> store post word in RTC scratch register >> >> - add support for configuring KSZ8864RMN switch through >> a config file on u-boot startup. For more infos see: >> doc/README.switch_config >> >> Signed-off-by: Heiko Schocher<h...@denx.de> >> Cc: Wolfgang Denk<w...@denx.de> >> Cc: Tom Rini<tom.r...@gmail.com> >> Cc: Christian Riesch<christian.rie...@omicron.at> >> Cc: Sandeep Paulraj<s-paul...@ti.com> >> >> --- >> changes for v2: >> - add comment from Tom Rini: >> remove ELDK-4.2 compiler warning: >> enbw_cmc.c: In function 'enbw_cmc_getvalue': >> enbw_cmc.c:447: warning: dereferencing type-punned pointer will break >> strict-aliasing rules >> >> $ ./tools/checkpatch.pl 0001-arm-davinci-update-for-enbw_cmc-board.patch >> total: 0 errors, 0 warnings, 498 lines checked >> >> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX >> MULTISTATEMENT_MACRO_USE_DO_WHILE >> >> 0001-arm-davinci-update-for-enbw_cmc-board.patch has no obvious style >> problems and is ready for submission. > > > Tom? Are there more issues with this patch?
Currently sitting in u-boot-arm/master I believe. -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
