On 06/25/2012 06:40 AM, Tetsuyuki Kobayashi wrote:
> Interrupts and exceptions doesn't work in relocated code.
> It badly use IRQ_STACK_START_IN in rom area as interrupt stack.
> It is because the vecotr table is not moved to ram area.
> This patch moves vector table before jumping relocated code.
>
> Signed-off-by: Tetsuyuki Kobayashi <k...@kmckk.co.jp>
CC'ing in some Tegra people.
Tetsuyuki, you probably want to CC some OMAP people too.
> ---
> arch/arm/cpu/armv7/start.S | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 52f7f6e..5098f7b 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -277,6 +277,18 @@ jump_2_ram:
> mcr p15, 0, r0, c7, c10, 4 @ DSB
> mcr p15, 0, r0, c7, c5, 4 @ ISB
> #endif
> +/*
> + * Move vector table
> + */
> +#if !defined(CONFIG_TEGRA2)
> +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
> + /* Set vector address in CP15 VBAR register */
> + ldr r0, =_start
> + add r0, r0, r9
> + mcr p15, 0, r0, c12, c0, 0 @Set VBAR
> +#endif
> +#endif /* !Tegra2 */
> +
> ldr r0, _board_init_r_ofs
> adr r1, _start
> add lr, r0, r1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
