Hi,
I am working on s3c2416 ARM9 based processor. The u-boot version used is u-boot
1.3.4. This u-boot does not have the splash screen implemented on the source
code.
To enable the splash screen, I defined CONFIG_SPLASH_SCREEN in
include/configs/smdk2416.h file. Now I get the error "undefined reference to
`video_display_bitmap'". So, the frame buffer driver was not initialized in my
bootloader.
I have the reference code for LCD initialization in the kernel driver, so I
thought of implementing a similar initialization on the bootloader also.
I am confused, from where to start the initialization for the LCD in the
bootloader. Should I start writing the driver from scratch, or is there any
reference code from I can start of for the LCD initialization.
Should I add one more initialization sequence inside *init_sequence[] array in
the start_armboot function, or can I make use of the drv_lcd_init inside
common/lcd.c file.
what would be a better approach to start with ?
Thank You
With Regards
GIGIN JOSE
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
