Hi, On 19 June 2012 13:00, Rajeshwari Shinde <rajeshwar...@samsung.com> wrote: > This patch set enables I2C support for EXYNOS5. > This patchset modifies the s3c24x0 I2C driver to use same for EXYNOS5. > Multichannel support has been added to the s3c24x0 I2C driver. > s3c24x0_i2c struct has been moved to a common place as it can used > by different SOC's. > > Changes in V2: > - Incorporated review comments from Simon Glass. > - Aligned the pinmux functionality as per latest comments > Changes in V3: > - Incorporated review comments from Joonyoung Shim for > I2C driver. > Changes in V4: > - Resolved build error for S3C2410. > But the patch version is still 3. > Rajeshwari Shinde (8): > EXYNOS: CLK: Add i2c clock > EXYNOS: Add I2C base address. > EXYNOS: PINMUX: Add pinmux support for I2C > I2C: Move struct s3c24x0_i2c to a common place. > I2C: S3C24X0: Add offset to calculate next i2c channel base address > I2C: Modify the I2C driver for EXYNOS5 > I2C: Add support for Multi channel > CONFIG: SMDK5250: I2C: Enable I2C > > arch/arm/cpu/armv7/exynos/clock.c | 33 ++++ > arch/arm/cpu/armv7/exynos/pinmux.c | 52 ++++++ > arch/arm/include/asm/arch-exynos/clk.h | 1 + > arch/arm/include/asm/arch-exynos/cpu.h | 3 + > arch/arm/include/asm/arch-exynos/periph.h | 8 + > arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 10 - > drivers/i2c/s3c24x0_i2c.c | 266 > +++++++++++++++++++-------- > drivers/i2c/s3c24x0_i2c.h | 39 ++++ > include/configs/smdk5250.h | 8 + > 9 files changed, 336 insertions(+), 84 deletions(-) > create mode 100644 drivers/i2c/s3c24x0_i2c.h > > -- > 1.7.4.4 >
-- with warm regards, Chander Kashyap _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
