commit 419ea2d84 (mx28: Split the README into a common part and a m28 specific
part)
missed an entry in the Contents section that was part of the original file.
Add the missing entry for completeness.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v2:
- Use 'into NAND' also in the middle of text rather than only in the Content
section
Change since v1:
- Fix completion->completeness , for->into
doc/README.mx28_common | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/doc/README.mx28_common b/doc/README.mx28_common
index 448d221..f73978d 100644
--- a/doc/README.mx28_common
+++ b/doc/README.mx28_common
@@ -19,6 +19,7 @@ Contents
1) Prerequisites
2) Compiling U-Boot for a MX28 based board
3) Installation of U-Boot for a MX28 based board to SD card
+4) Installation of U-Boot into NAND flash
1) Prerequisites
----------------
@@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the
"mxsboot" tool contains
a "-p" switch for that purpose. The "-p" switch takes the sector number
as
an argument.
-4) Installation of U-Boot for NAND flash
------------------------------------------------
+4) Installation of U-Boot into NAND flash
+-----------------------------------------
To boot a MX28 based board from NAND, set the boot mode DIP switches according
to i.MX28
manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
