Signed-off-by: Stefano Babic <sba...@denx.de>
---
board/teejet/mt_ventoux/mt_ventoux.c | 63 ++++++++++++++++++++++++++++++++++
board/teejet/mt_ventoux/mt_ventoux.h | 2 +-
include/configs/mt_ventoux.h | 17 +++++++++
3 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c
b/board/teejet/mt_ventoux/mt_ventoux.c
index c5eb42c..ecf91f7 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -21,13 +21,16 @@
#include <common.h>
#include <netdev.h>
+#include <malloc.h>
#include <fpga.h>
+#include <video_fb.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/dss.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
@@ -50,6 +53,28 @@ DECLARE_GLOBAL_DATA_PTR;
#define FPGA_INIT 119
#define FPGA_DONE 154
+#define LCD_PWR 138
+#define LCD_PON_PIN 139
+#define XRES 480
+#define YRES 272
+
+static const struct panel_config lcd_cfg = {
+
+ .timing_h = ((4 /* hpb */ - 1) << 20) |
+ ((8 /*hfp */- 1) << 8) |
+ (41 /* hsw */ - 1), /* Horizontal timing */
+ .timing_v = (2 /*vbp */ << 24) |
+ (4 /* vfp */ << 8) |
+ (10 - 1), /* Vertical timing */
+ .pol_freq = 0x00000000, /* Pol Freq */
+ .divisor = 0x0001000d, /* 33Mhz Pixel Clock */
+ .lcd_size = ((YRES - 1) << 16 | (XRES - 1)),
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+};
+
/* Timing definitions for FPGA */
static const u32 gpmc_fpga[] = {
FPGA_GPMC_CONFIG1,
@@ -231,3 +256,41 @@ int board_mmc_init(bd_t *bis)
return omap_mmc_init(0);
}
#endif
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+static GraphicDevice panel;
+
+void *video_hw_init(void)
+{
+
+ void *fb;
+ u32 size;
+
+ panel.gdfBytesPP = 4;
+ panel.gdfIndex = GDF_32BIT_X888RGB;
+ size = XRES * YRES * panel.gdfBytesPP * 2 + 1024;
+
+ fb = (void *)0x80500000;
+
+ printf("Frame buffer address 0x%p\n", fb);
+
+ gpio_request(LCD_PWR, "LCD Power");
+ gpio_request(LCD_PON_PIN, "LCD Pon");
+ gpio_direction_output(LCD_PWR, 0);
+ gpio_direction_output(LCD_PON_PIN, 1);
+
+ panel.winSizeX = XRES;
+ panel.winSizeY = YRES;
+ panel.plnSizeX = XRES;
+ panel.plnSizeY = YRES;
+
+ panel.frameAdrs = (u32)fb;
+ panel.memSize = size;
+
+ omap3_dss_panel_config(&lcd_cfg);
+ omap3_dss_setfb(fb);
+ omap3_dss_enable();
+
+ return (void *)&panel;
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h
b/board/teejet/mt_ventoux/mt_ventoux.h
index 9b2e43e..90331f4 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -221,7 +221,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \
MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \
/* GPIO_138: LCD_ENVD */\
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \
/* GPIO_139: LCD_PON */\
/* McBSP */\
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
index 5db6d57..8ea0dc2 100644
--- a/include/configs/mt_ventoux.h
+++ b/include/configs/mt_ventoux.h
@@ -2,6 +2,9 @@
* Copyright (C) 2011
* Stefano Babic, DENX Software Engineering, sba...@denx.de.
*
+ *
+ * Configuration settings for the Teejet mt_ventoux board.
+ *
* Copyright (C) 2009 TechNexion Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -24,6 +27,10 @@
#include "tam3517-common.h"
+#undef CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \
+ 6 * 1024 * 1024)
+
#define MACH_TYPE_AM3517_MT_VENTOUX 3832
#define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX
@@ -62,6 +69,16 @@
#define CONFIG_FPGA_DELAY() udelay(1)
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+/* #define CONFIG_VIDEO_LOGO */
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_OMAP3 /* DSS Support */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
"bootcmd=run net_nfs\0"
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
