On Thu Jun 07, 2012 at 03:25:27PM +0530, Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar....@ti.com> > > This series adds MMC/SD, NAND and NOR SPL support > for Logic PD's DA850/OMAP-L138 EVM. This series > also fixes some issues found on the EVM during > testing. The patches are sent in a series as these > patches need to be applied in the order they are sent. > > Changes for v2: > 1: Fixed comments from Tom to remove unused macro > and add comment. > 2: Fixed comments from Christian to move GPIO pins > to board file and add a check to perform initializations > only when CONFIG_SPL_LIBCOMMON_SUPPORT is defined. > > Lad, Prabhakar (5): > da850/omap-l138: Add MMC support for DA850/OMAP-L138 > da850/omap-l138: Add support to read u-boot image from MMC/SD > da850/omap-l138: Fix NAND flash timings > da850/omap-l138: Add support for NAND SPL > da850/omap-l138: add support for direct NOR boot mode > > Rajashekhara, Sudhakar (2): > da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM > da850/omap-l138: Make MMC and NOR support mutually exclusive > > arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 11 +++ > arch/arm/cpu/arm926ejs/davinci/spl.c | 27 +++++-- > arch/arm/include/asm/arch-davinci/hardware.h | 1 + > arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 + > board/davinci/da8xxevm/da850evm.c | 54 +++++++++++++-- > boards.cfg | 1 + > drivers/mmc/Makefile | 4 + > drivers/mmc/spl_mmc_load.c | 62 ++++++++++++++++ > include/configs/da850evm.h | 86 > +++++++++++++++++++++-- > include/mmc.h | 2 + > 10 files changed, 233 insertions(+), 18 deletions(-) > create mode 100644 drivers/mmc/spl_mmc_load.c
Tested on hawkboard. Boots up fine. Tested-by: Sughosh Ganu <urwithsugh...@gmail.com> -sughosh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
