Hi,
On Tue, May 22, 2012 at 11:12 PM, Chander Kashyap <
chander.kash...@linaro.org> wrote:
> Hi,
>
> On 4 May 2012 12:26, Rajeshwari Shinde <rajeshwar...@samsung.com> wrote:
> > This patch performs the pinmux configuration in a common file.
> > As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is
> > supported.
> >
> > Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
> > Signed-off-by: Che-Liang Chiou <clch...@chromium.org>
> > Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
> > ---
> > arch/arm/cpu/armv7/exynos/pinmux.c | 189
> +++++++++++++++++++++++++++++
> > arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++
> > 2 files changed, 266 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c
> > create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
> >
> > diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c
> b/arch/arm/cpu/armv7/exynos/pinmux.c
> > new file mode 100644
> > index 0000000..11f4b71
> > --- /dev/null
> > +++ b/arch/arm/cpu/armv7/exynos/pinmux.c
> > @@ -0,0 +1,189 @@
> > +/*
> > + * Copyright (c) 2012 Samsung Electronics.
> > + * Abhilash Kesavan <a.kesa...@samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <asm/arch/cpu.h>
> > +#include <asm/arch/gpio.h>
> > +#include <asm/arch/pinmux.h>
> > +#include <asm/arch/sromc.h>
> > +
> > +int exynos5_pinmux_config(int peripheral, int flags)
> It should be static
>
It can't be static, as it is called from board files, drivers, etc.
> > +{
> > + struct exynos5_gpio_part1 *gpio1 =
> > + (struct exynos5_gpio_part1 *)
> samsung_get_base_gpio_part1();
> > + struct s5p_gpio_bank *bank, *bank_ext;
> > + int i, start, count;
> > +
> > + switch (peripheral) {
> > + case PERIPH_ID_UART0:
> > + case PERIPH_ID_UART1:
> > + case PERIPH_ID_UART2:
> > + case PERIPH_ID_UART3:
> > + switch (peripheral) {
> > + case PERIPH_ID_UART0:
> > + bank = &gpio1->a0;
> > + start = 0; count = 4;
> > + break;
> > + case PERIPH_ID_UART1:
> > + bank = &gpio1->a0;
> > + start = 4; count = 4;
> > + break;
> > + case PERIPH_ID_UART2:
> > + bank = &gpio1->a1;
> > + start = 0; count = 4;
> > + break;
> > + case PERIPH_ID_UART3:
> > + bank = &gpio1->a1;
> > + start = 4; count = 2;
> > + break;
> > + }
> > + for (i = start; i < start + count; i++) {
> > + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
> > + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
> > + }
> > + break;
> > + case PERIPH_ID_SDMMC0:
> > + case PERIPH_ID_SDMMC1:
> > + case PERIPH_ID_SDMMC2:
> > + case PERIPH_ID_SDMMC3:
> > + switch (peripheral) {
> > + case PERIPH_ID_SDMMC0:
> > + bank = &gpio1->c0; bank_ext = &gpio1->c1;
> > + break;
> > + case PERIPH_ID_SDMMC1:
> > + bank = &gpio1->c1; bank_ext = NULL;
> > + break;
> > + case PERIPH_ID_SDMMC2:
> > + bank = &gpio1->c2; bank_ext = &gpio1->c3;
> > + break;
> > + case PERIPH_ID_SDMMC3:
> > + bank = &gpio1->c3; bank_ext = NULL;
> > + break;
> > + }
> > + if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
> > + debug("SDMMC device %d does not support 8bit
> mode",
> > + peripheral);
> > + return -1;
> > + }
> > + if (flags & PINMUX_FLAG_8BIT_MODE) {
> > + for (i = 3; i <= 6; i++) {
> > + s5p_gpio_cfg_pin(bank_ext, i,
> GPIO_FUNC(0x3));
> > + s5p_gpio_set_pull(bank_ext, i,
> GPIO_PULL_UP);
> > + s5p_gpio_set_drv(bank_ext, i,
> GPIO_DRV_4X);
> > + }
> > + }
> > + for (i = 0; i < 2; i++) {
> > + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
> > + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
> > + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
> > + }
> > + for (i = 3; i <= 6; i++) {
> > + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
> > + s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
> > + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
> > + }
> > + break;
> > + case PERIPH_ID_SROMC:
> > + /*
> > + * SROM:CS1 and EBI
> > + *
> > + * GPY0[0] SROM_CSn[0]
> > + * GPY0[1] SROM_CSn[1](2)
> > + * GPY0[2] SROM_CSn[2]
> > + * GPY0[3] SROM_CSn[3]
> > + * GPY0[4] EBI_OEn(2)
> > + * GPY0[5] EBI_EEn(2)
> > + *
> > + * GPY1[0] EBI_BEn[0](2)
> > + * GPY1[1] EBI_BEn[1](2)
> > + * GPY1[2] SROM_WAIT(2)
> > + * GPY1[3] EBI_DATA_RDn(2)
> > + */
> > + s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
> > + GPIO_FUNC(2));
> > + s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
> > + s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
> > +
> > + for (i = 0; i < 4; i++)
> > + s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
> > +
> > + /*
> > + * EBI: 8 Addrss Lines
> > + *
> > + * GPY3[0] EBI_ADDR[0](2)
> > + * GPY3[1] EBI_ADDR[1](2)
> > + * GPY3[2] EBI_ADDR[2](2)
> > + * GPY3[3] EBI_ADDR[3](2)
> > + * GPY3[4] EBI_ADDR[4](2)
> > + * GPY3[5] EBI_ADDR[5](2)
> > + * GPY3[6] EBI_ADDR[6](2)
> > + * GPY3[7] EBI_ADDR[7](2)
> > + *
> > + * EBI: 16 Data Lines
> > + *
> > + * GPY5[0] EBI_DATA[0](2)
> > + * GPY5[1] EBI_DATA[1](2)
> > + * GPY5[2] EBI_DATA[2](2)
> > + * GPY5[3] EBI_DATA[3](2)
> > + * GPY5[4] EBI_DATA[4](2)
> > + * GPY5[5] EBI_DATA[5](2)
> > + * GPY5[6] EBI_DATA[6](2)
> > + * GPY5[7] EBI_DATA[7](2)
> > + *
> > + * GPY6[0] EBI_DATA[8](2)
> > + * GPY6[1] EBI_DATA[9](2)
> > + * GPY6[2] EBI_DATA[10](2)
> > + * GPY6[3] EBI_DATA[11](2)
> > + * GPY6[4] EBI_DATA[12](2)
> > + * GPY6[5] EBI_DATA[13](2)
> > + * GPY6[6] EBI_DATA[14](2)
> > + * GPY6[7] EBI_DATA[15](2)
> > + */
> > + for (i = 0; i < 8; i++) {
> > + s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
> > + s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
> > +
> > + s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
> > + s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
> > +
> > + s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
> > + s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
> > + }
> > + break;
> > + default:
> > + debug("%s: invalid peripheral %d", __func__, peripheral);
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int exynos_pinmux_config(int peripheral, int flags)
> > +{
> > + if (cpu_is_exynos5())
> > + return exynos5_pinmux_config(peripheral, flags);
> > + else{
> > + debug("pinmux functionality not supported\n");
> > + return -1;
> > + }
> > +}
> > diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h
> b/arch/arm/include/asm/arch-exynos/pinmux.h
> > new file mode 100644
> > index 0000000..306f521
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-exynos/pinmux.h
> > @@ -0,0 +1,77 @@
> > +/*
> > + * Copyright (C) 2012 Samsung Electronics
> > + * Abhilash Kesavan <a.kesa...@samsung.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#ifndef __ASM_ARM_ARCH_PINMUX_H
> > +#define __ASM_ARM_ARCH_PINMUX_H
> > +
> > +/*
> > + * Peripherals requiring clock/pinmux configuration. List will
> > + * grow with support for more devices getting added.
> > + *
> > + */
> > +enum periph_id {
> > + PERIPH_ID_SDMMC0,
> > + PERIPH_ID_SDMMC1,
> > + PERIPH_ID_SDMMC2,
> > + PERIPH_ID_SDMMC3,
> > + PERIPH_ID_SDMMC4,
> > + PERIPH_ID_SROMC,
> > + PERIPH_ID_UART0,
> > + PERIPH_ID_UART1,
> > + PERIPH_ID_UART2,
> > + PERIPH_ID_UART3,
> > +
> > + PERIPH_ID_COUNT,
> > + PERIPH_ID_NONE = -1,
> > +};
> > +
> > +/*
> > + * Flags for setting specific configarations of peripherals.
> > + * List will grow with support for more devices getting added.
> > + */
> > +enum {
> > + PINMUX_FLAG_NONE = 0x00000000,
> > +
> > + /* Flags for eMMC */
> > + PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
> > +
> > + /* Flags for SROM controller */
> > + PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
> > + PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
> > +};
> > +
> > +/**
> > + * Configures the pinmux for a particular peripheral.
> > + *
> > + * Each gpio can be configured in many different ways (4 bits on exynos)
> > + * such as "input", "output", "special function", "external interrupt"
> > + * etc. This function will configure the peripheral pinmux along with
> > + * pull-up/down and drive strength.
> > + *
> > + * @param peripheral peripheral to be configured
> > + * @param flags configure flags
> > + * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
> > + */
> > +int exynos_pinmux_config(int peripheral, int flags);
> > +
> > +#endif
> > --
> > 1.7.4.4
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot@lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
> --
> with warm regards,
> Chander Kashyap
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
