From: Stephen Warren <swar...@nvidia.com>
Fix the .dts file USB unit addresses not to duplicate each-other.
Fix the board name string to indicate the vendor is Compulab not NVIDIA.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
board/compulab/dts/tegra2-trimslice.dts | 2 +-
include/configs/trimslice.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/compulab/dts/tegra2-trimslice.dts
b/board/compulab/dts/tegra2-trimslice.dts
index c707eb8..db79e77 100644
--- a/board/compulab/dts/tegra2-trimslice.dts
+++ b/board/compulab/dts/tegra2-trimslice.dts
@@ -47,7 +47,7 @@
status = "disabled";
};
- usb@c5004000 {
+ usb@c5000000 {
status = "disabled";
};
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index dec9125..39c9866 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -34,7 +34,7 @@
/* High-level configuration options */
#define V_PROMPT "Tegra2 (TrimSlice) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Trimslice"
+#define CONFIG_TEGRA2_BOARD_STRING "Compulab Trimslice"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
