This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset. Or, you can boot from either SD Card.
Currently, support added for MX53 and MX6Q Signed-off-by: Troy Kisky <[email protected]> Note: MX53 support untested. --- arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++++ arch/arm/include/asm/arch-mx6/imx-regs.h | 21 +++++ common/Makefile | 1 + common/cmd_rsmode.c | 118 ++++++++++++++++++++++++++++++ 4 files changed, 158 insertions(+), 0 deletions(-) create mode 100644 common/cmd_rsmode.c diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index cef4190..4f27c00 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -456,6 +456,24 @@ struct src { u32 simr; }; +struct srtc_regs { + u32 lpscmr; /* 0x00 */ + u32 lpsclr; /* 0x04 */ + u32 lpsar; /* 0x08 */ + u32 lpsmcr; /* 0x0c */ + u32 lpcr; /* 0x10 */ + u32 lpsr; /* 0x14 */ + u32 lppdr; /* 0x18 */ + u32 lpgr; /* 0x1c */ + u32 hpcmr; /* 0x20 */ + u32 hpclr; /* 0x24 */ + u32 hpamr; /* 0x28 */ + u32 hpalr; /* 0x2c */ + u32 hpcr; /* 0x30 */ + u32 hpisr; /* 0x34 */ + u32 hpienr; /* 0x38 */ +}; + /* CSPI registers */ struct cspi_regs { u32 rxdata; diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index e165810..5acc9ca 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -445,5 +445,26 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct src_regs { + u32 scr; /* 0x00 */ + u32 sbmr1; /* 0x04 */ + u32 srsr; /* 0x08 */ + u32 reserved1; /* 0x0c */ + u32 reserved2; /* 0x10 */ + u32 sisr; /* 0x14 */ + u32 simr; /* 0x18 */ + u32 sbmr2; /* 0x1c */ + u32 gpr1; /* 0x20 */ + u32 gpr2; /* 0x24 */ + u32 gpr3; /* 0x28 */ + u32 gpr4; /* 0x2c */ + u32 gpr5; /* 0x30 */ + u32 gpr6; /* 0x34 */ + u32 gpr7; /* 0x38 */ + u32 gpr8; /* 0x3c */ + u32 gpr9; /* 0x40 */ + u32 gpr10; /* 0x44 */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/common/Makefile b/common/Makefile index d9f10f3..8e17cec 100644 --- a/common/Makefile +++ b/common/Makefile @@ -139,6 +139,7 @@ COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o +COBJS-$(CONFIG_CMD_RSMODE) += cmd_rsmode.o COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o diff --git a/common/cmd_rsmode.c b/common/cmd_rsmode.c new file mode 100644 index 0000000..40ad6bc --- /dev/null +++ b/common/cmd_rsmode.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> + +#define mkval(cfg1, cfg2, cfg3, cfg4) \ + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1) + +struct reset_mode { + const char *name; + unsigned cfg_val; +}; + +#ifdef CONFIG_MX53 +/* + * cfg_val will be used for + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * + * If bit 28 of LPGR is set upon watchdog reset, + * bits[25:0] of LPGR will move to SBMR. + */ +#define SBMR_COPY_ADDR &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr +const struct reset_mode modes[] = { + {"normal", mkval(0x00, 0x00, 0x00, 0x00)}, + {"usb", mkval(0x00, 0x00, 0x00, 0x13)}, /* or serial download */ + {"sata", mkval(0x28, 0x00, 0x00, 0x12)}, + {"escpi1:0", mkval(0x38, 0x20, 0x00, 0x12)}, + {"escpi1:1", mkval(0x38, 0x20, 0x04, 0x12)}, + {"escpi1:2", mkval(0x38, 0x20, 0x08, 0x12)}, + {"escpi1:3", mkval(0x38, 0x20, 0x0c, 0x12)}, + {"esdhc1", mkval(0x40, 0x20, 0x00, 0x12)}, /* 4 bit bus width */ + {"esdhc2", mkval(0x40, 0x20, 0x08, 0x12)}, + {"esdhc3", mkval(0x40, 0x20, 0x10, 0x12)}, + {"esdhc4", mkval(0x40, 0x20, 0x18, 0x12)}, +}; +#endif + +#ifdef CONFIG_MX6Q +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + */ +#define SBMR_COPY_ADDR &((struct src_regs *)SRC_BASE_ADDR)->gpr9 +/* + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +#define SMBR_COPY_ENABLE_ADDR &((struct src_regs *)SRC_BASE_ADDR)->gpr10 +const struct reset_mode modes[] = { + {"normal", mkval(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", mkval(0x01, 0x00, 0x00, 0x00)}, + {"sata", mkval(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", mkval(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", mkval(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", mkval(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", mkval(0x30, 0x00, 0x00, 0x38)}, + {"esdhc1", mkval(0x40, 0x20, 0x00, 0x00)}, /* 4 bit bus width */ + {"esdhc2", mkval(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", mkval(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", mkval(0x40, 0x38, 0x00, 0x00)}, +}; +#endif + +int do_rsmode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int i; + if (argc < 2) { +options: + printf("Options:\n"); + for (i = 0; i < ARRAY_SIZE(modes); i++) + printf("%s\n", modes[i].name); + return 0; + } + for (i = 0; i < ARRAY_SIZE(modes); i++) { + if (!strcmp(modes[i].name, argv[1])) + break; + } + if (i >= ARRAY_SIZE(modes)) + goto options; + writel(modes[i].cfg_val, SBMR_COPY_ADDR); +#ifdef SMBR_COPY_ENABLE_ADDR + { + unsigned reg = readl(SMBR_COPY_ENABLE_ADDR); + if (i) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, SMBR_COPY_ENABLE_ADDR); + } +#endif + return 0; +} + +U_BOOT_CMD( + rsmode, 2, 0, do_rsmode, + "change reset mode to normal/usb/sata/ecspi1:1/esdhc1", + ""); -- 1.7.5.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
