Dear Marek Vasut, In message <201205231127.51935.ma...@denx.de> you wrote: > > Because there'd then be no way to tell apart u-boot.bin.sd for another target > but mx28.
So what? We also use "u-boot.bin" for all targets. What's the difference? > > Would it not be useful to automatically build these images when > > someone runs just "make -j8 -s m28evk" (or "./MAKEALL m28evk") ? > > Usually, you just want to update the system. You don't need the full image > for > that in NAND case. You do in SD card. Ok, it might be useful. Indeed. I consider it useful, too. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de The explanation requiring the fewest assumptions is the most likely to be correct. -- William of Occam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot