ccing Lukasz Majewski.

On Wed, May 23, 2012 at 2:27 PM, Rajeshwari Shinde
<rajeshwar...@samsung.com> wrote:
> This patch enables MAX77686 pmic chip for SMDK5250.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
> ---
> This patch is based on:
>        "EXYNOS: SMDK5250: Enable the pinmux setup" and
>        "CONFIG: SMDK5250: I2C: Enable I2C"
>  board/samsung/smdk5250/smdk5250.c |    4 ++++
>  include/configs/smdk5250.h        |    6 ++++++
>  2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c 
> b/board/samsung/smdk5250/smdk5250.c
> index b7d7a79..58763fd 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -28,6 +28,7 @@
>  #include <asm/arch/mmc.h>
>  #include <asm/arch/pinmux.h>
>  #include <asm/arch/sromc.h>
> +#include <pmic.h>
>
>  DECLARE_GLOBAL_DATA_PTR;
>
> @@ -59,6 +60,9 @@ static void smc9115_pre_init(void)
>  int board_init(void)
>  {
>        gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
> +#if defined(CONFIG_PMIC)
> +       pmic_init();
> +#endif
>        return 0;
>  }
>
> diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
> index 1fca652..05729e6 100644
> --- a/include/configs/smdk5250.h
> +++ b/include/configs/smdk5250.h
> @@ -198,6 +198,12 @@
>  #define CONFIG_I2C_MULTI_BUS
>  #define CONFIG_MAX_I2C_NUM     8
>
> +/* PMIC */
> +#define CONFIG_SYS_I2C_SLAVE   0x0
> +#define CONFIG_PMIC
> +#define CONFIG_PMIC_I2C
> +#define CONFIG_PMIC_MAX77686
> +
>  /* Ethernet Controllor Driver */
>  #ifdef CONFIG_CMD_NET
>  #define CONFIG_SMC911X
> --
> 1.7.4.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to