This patch series support OMAP5432 in Mainline U-boot. The major difference from OMAP5430 is that it supports DDR3 memory. Things to be done for supporting DDR3: 1) ioconfig for ddr3 2) Initialization sequence and ddr3 leveling 3) Change in DPLL_CORE locking sequence 4) Voltage changes
This series has been tested on OMAP4430 sdp OMAP5430sevm OMAP5432uevm MAKEALL has been tested for all armv7 boards to ensure no build breakage. Lokesh Vutla (7): OMAP5: Adding correct Control id code for OMAP5430 OMAP5: ADD chip detection for OMAP5432 SOC OMAP5: Configure the io settings for omap5432 uevm board OMAP5: ADD precalculated timings for ddr3 OMAP5: EMIF: Add support for DDR3 device OMAP5: DPLL core lock for OMAP5432 OMAP5: Change voltages for omap5432 arch/arm/cpu/armv7/omap-common/clocks-common.c | 8 +- arch/arm/cpu/armv7/omap-common/emif-common.c | 118 +++++++++++++++++++++-- arch/arm/cpu/armv7/omap4/hwinit.c | 5 + arch/arm/cpu/armv7/omap4/sdram_elpida.c | 1 + arch/arm/cpu/armv7/omap5/clocks.c | 31 ++++-- arch/arm/cpu/armv7/omap5/hwinit.c | 123 ++++++++++++++++++++---- arch/arm/cpu/armv7/omap5/sdram.c | 50 ++++++++++- arch/arm/include/asm/arch-omap4/clocks.h | 5 + arch/arm/include/asm/arch-omap5/clocks.h | 15 +++ arch/arm/include/asm/arch-omap5/omap.h | 18 +++- arch/arm/include/asm/emif.h | 50 ++++++++++- arch/arm/include/asm/omap_common.h | 1 + 12 files changed, 382 insertions(+), 43 deletions(-) -- 1.7.5.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
