Joe, What repo/branch? I assume u-boot-tegra/master?
What compiler/tools? I usually use either ELDK42 or GCC 4.4.1 and I don't see this. Using 'git blame' and searching Patchwork, I do see that Simon posted a patch for this awhile back (tegra: Correct PLL access in ap20.c and clock.c) but I don't have it in the u-boot-tegra/master repo so I must have missed it/dropped it. I'll apply it as part of the next pull request. Thanks for catching this, Tom > -----Original Message----- > From: Joe Hershberger [mailto:joe.hershber...@gmail.com] > Sent: Monday, May 21, 2012 4:11 PM > To: u-boot; Tom Warren > Subject: FYI: Warning on tegra builds > > Hi Tom, > > I'm seeing the following on tegra builds: > > Configuring for harmony board... > text data bss dec hex filename > 171562 4016 218244 393822 6025e /tmp/u-boot-build//harmony/u-boot > ap20.c: In function 'init_pllx': > ap20.c:81:18: warning: array subscript is above array bounds Configuring for > seaboard board... > text data bss dec hex filename > 223058 4592 264716 492366 7834e /tmp/u-boot-build//seaboard/u-boot > ap20.c: In function 'init_pllx': > ap20.c:81:18: warning: array subscript is above array bounds > /bin/sh: line 1: exit: too many arguments > make[1]: *** [/tmp/u-boot-build/seaboard/dts/dt.dtb] Error 1 > make: *** [/tmp/u-boot-build/seaboard/u-boot.dtb] Error 2 > make: *** Waiting for unfinished jobs.... > Configuring for ventana board... > text data bss dec hex filename > 175075 4020 218224 397319 61007 /tmp/u-boot-build//ventana/u-boot > ap20.c: In function 'init_pllx': > ap20.c:81:18: warning: array subscript is above array bounds > /bin/sh: line 1: exit: too many arguments > make[1]: *** [/tmp/u-boot-build/ventana/dts/dt.dtb] Error 1 > make: *** [/tmp/u-boot-build/ventana/u-boot.dtb] Error 2 > > Cheers, > -Joe -- nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
