On 02/05/2012 14:12, Dirk Behme wrote: > Init the core regulator voltage to 1.2V. This is required for the correct > functioning of the GPU and when the ARM LDO is set to 1.225V. This is a > workaround to fix some memory clock jitter. > > Note: This should be but can't be done in the DCD. The bootloader > prevents access to the ANATOP registers. > > Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com> > CC: Jason Chen <b02...@freescale.com> > CC: Jason Liu <r64...@freescale.com> > CC: Ranjani Vaidyanathan <ra5...@freescale.com> > CC: Stefano Babic <sba...@denx.de> > CC: Fabio Estevam <feste...@gmail.com> > ---
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
