From: Thomas Herzmann <thomas.herzm...@keymile.com>
On kmcoge5ne we have a dip switch present. If this switch
was switched on the actual_bank is set to 0 and this SW
will be booted.
Signed-off-by: Thomas Herzmann <thomas.herzm...@keymile.com>
Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
---
board/keymile/km83xx/km83xx.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index f05cdfd..e01a633 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -195,6 +195,17 @@ int misc_init_r(void)
int last_stage_init(void)
{
+#if defined(CONFIG_KMCOGE5NE)
+ struct bfticu_iomap *base =
+ (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
+ u8 dip_switch = in_8((u8 *)&(base->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+ if (dip_switch != 0) {
+ /* start bootloader */
+ puts("DIP: Enabled\n");
+ setenv("actual_bank", "0");
+ }
+#endif
set_km_env();
return 0;
}
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
