Dear Joakim, In message <of35057017.5788f889-onc12579f3.00427b35-c12579f3.00442...@transmode.se> you wrote: > > I found the problem, u-boot is somewhat flawed, it requires > CONFIG_SYS_MONITOR_BASE > to be "base 2 even", must land on a 256K or 512K or 1024K address. I had
This is not a generic U-Boot problem, just one oif the 85xx implementation. > On a related matter, I believe that one should be able to have a minimal > emulator > config that allows you to both program flash efficiently and debug u-boot > via BDI/gdb. > I have always managed to do this before with our earlier freescale CPUs but > now > seems hard(impossible?) with the current u-boot design. It is a major > pain to change emul config each time you do the burn flash/debug cycle. I agree with you - but again, this is "only" a 85xx issue, not a generic U-Boot design problem. I know, this doesn't help you much... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "If anything can go wrong, it will." - Edsel Murphy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
