Dear RAJESHWARI S SHINDE,
> Hi Marek,
>
> Thank you for the comments, would modify the code and send V2.
Thank you for your patches and your work, they are what's important here :-)
> Regards,
> Rajeshwari Shinde.
>
> ------- Original Message -------
> Sender : Marek Vasut<ma...@denx.de>
> Date : May 02, 2012 06:17 (GMT+09:00)
> Title : Re: [U-Boot] [PATCH] USB: S5P: Add ehci support
>
> Dear Rajeshwari Shinde,
>
> > This patch adds ehci driver support for s5p.
>
> It'd be awesome if you CCed me ;-)
> Also, it might be worth CCing Lukasz?
>
> > Signed-off-by: Vivek Gautam
> > Signed-off-by: Rajeshwari Shinde
> > ---
> >
> > arch/arm/include/asm/arch-exynos/ehci-s5p.h | 66 ++++++++++++++++
> > drivers/usb/host/Makefile | 1 +
> > drivers/usb/host/ehci-s5p.c | 113
> >
> > +++++++++++++++++++++++++++ 3 files changed, 180 insertions(+), 0
> > deletions(-)
> >
> > create mode 100755 arch/arm/include/asm/arch-exynos/ehci-s5p.h
> > create mode 100644 drivers/usb/host/ehci-s5p.c
> >
> > diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> > b/arch/arm/include/asm/arch-exynos/ehci-s5p.h new file mode 100755
> > index 0000000..68feb85
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
> > @@ -0,0 +1,66 @@
> > +/*
> > + * SAMSUNG S5P USB HOST EHCI Controller
> > + *
> > + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> > + * Vivek Gautam
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> > + * MA 02110-1301 USA
> > + */
> > +
> > +#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> > +#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
> > +
> > +#define CLK_24MHZ 5
> > +
> > +#define HOST_CTRL0_PHYSWRSTALL (1 << 31)
> > +#define HOST_CTRL0_COMMONON_N (1 << 9)
> > +#define HOST_CTRL0_SIDDQ (1 << 6)
> > +#define HOST_CTRL0_FORCESLEEP (1 << 5)
> > +#define HOST_CTRL0_FORCESUSPEND (1 << 4)
> > +#define HOST_CTRL0_WORDINTERFACE (1 << 3)
> > +#define HOST_CTRL0_UTMISWRST (1 << 2)
> > +#define HOST_CTRL0_LINKSWRST (1 << 1)
> > +#define HOST_CTRL0_PHYSWRST (1 << 0)
> > +
> > +#define HOST_CTRL0_FSEL_MASK (7 << 16)
> > +
> > +#define EHCICTRL_ENAINCRXALIGN (1 << 29)
> > +#define EHCICTRL_ENAINCR4 (1 << 28)
> > +#define EHCICTRL_ENAINCR8 (1 << 27)
> > +#define EHCICTRL_ENAINCR16 (1 << 26)
> > +
> > +/* Register map for PHY control */
> > +struct s5p_usb_phy {
> > + unsigned int usbphyctrl0;
> > + unsigned int usbphytune0;
> > + unsigned int reserved1[2];
> > + unsigned int hsicphyctrl1;
> > + unsigned int hsicphytune1;
> > + unsigned int reserved2[2];
> > + unsigned int hsicphyctrl2;
> > + unsigned int hsicphytune2;
> > + unsigned int reserved3[2];
> > + unsigned int ehcictrl;
> > + unsigned int ohcictrl;
> > + unsigned int usbotgsys;
> > + unsigned int reserved4;
> > + unsigned int usbotgtune;
> > +};
> > +
> > +/* Switch on the VBUS power. */
> > +int board_usb_vbus_init(void);
> > +
> > +#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */
> > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> > index 0d4657e..59c3e57 100644
> > --- a/drivers/usb/host/Makefile
> > +++ b/drivers/usb/host/Makefile
> > @@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
> >
> > COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
> > COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
> > COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
> >
> > +COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
> >
> > COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
> > COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
> >
> > diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> > new file mode 100644
> > index 0000000..ac9f061
> > --- /dev/null
> > +++ b/drivers/usb/host/ehci-s5p.c
> > @@ -0,0 +1,113 @@
> > +/*
> > + * SAMSUNG S5P USB HOST EHCI Controller
> > + *
> > + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> > + * Vivek Gautam
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> > + * MA 02110-1301 USA
> > + */
> > +
> > +#include
> > +#include
> > +#include
> > +#include
> > +#include "ehci.h"
> > +#include "ehci-core.h"
> > +
> > +/* Setup the EHCI host controller. */
> > +static void setup_usb_phy(struct s5p_usb_phy *usb)
> > +{
> > + unsigned int hostphy_ctrl0;
> > +
> > + /* Setting up host and device simultaneously */
> > + hostphy_ctrl0 = readl(&usb->usbphyctrl0);
> > + hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
> > + HOST_CTRL0_COMMONON_N |
> > + /* HOST Phy setting */
> > + HOST_CTRL0_PHYSWRST |
> > + HOST_CTRL0_PHYSWRSTALL |
> > + HOST_CTRL0_SIDDQ |
> > + HOST_CTRL0_FORCESUSPEND |
> > + HOST_CTRL0_FORCESLEEP);
> > + hostphy_ctrl0 |= (/* Setting up the ref freq */
> > + CLK_24MHZ << 16 |
>
> Parens around (CLK << 16).
> -- Corrected
>
> > + /* HOST Phy setting */
> > + HOST_CTRL0_LINKSWRST |
> > + HOST_CTRL0_UTMISWRST);
> > + writel(hostphy_ctrl0, &usb->usbphyctrl0);
>
> Use clrsetbits_le32() please.
> -- Corrected
>
> > + udelay(10);
> > + clrbits_le32(&usb->usbphyctrl0,
> > + HOST_CTRL0_LINKSWRST |
> > + HOST_CTRL0_UTMISWRST);
> > + udelay(20);
> > +
> > + /* EHCI Ctrl setting */
> > + setbits_le32(&usb->ehcictrl,
> > + EHCICTRL_ENAINCRXALIGN |
> > + EHCICTRL_ENAINCR4 |
> > + EHCICTRL_ENAINCR8 |
> > + EHCICTRL_ENAINCR16);
> > +}
> > +
> > +/* Reset the EHCI host controller. */
> > +static void reset_usb_phy(struct s5p_usb_phy *usb)
> > +{
> > + /* HOST_PHY reset */
> > + setbits_le32(&usb->usbphyctrl0,
> > + HOST_CTRL0_PHYSWRST |
> > + HOST_CTRL0_PHYSWRSTALL |
> > + HOST_CTRL0_SIDDQ |
> > + HOST_CTRL0_FORCESUSPEND |
> > + HOST_CTRL0_FORCESLEEP);
> > +}
> > +
> > +/*
> > + * EHCI-initialization
> > + * Create the appropriate control structures to manage
> > + * a new EHCI host controller.
> > + */
> > +int ehci_hcd_init(void)
> > +{
> > + struct s5p_usb_phy *usb;
> > +
> > + usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> > + setup_usb_phy(usb);
> > +
> > + hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
> > + hcor = (struct ehci_hcor *)((uint32_t) hccr
> > + + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> > +
> > + printf("\n usb cmd addr = %x", &hcor->or_usbcmd);
>
> Either debug() or remove the above ;-)
> -- Removed
>
> > + debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
> > + (uint32_t)hccr, (uint32_t)hcor,
> > + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Destroy the appropriate control structures corresponding
> > + * the EHCI host controller.
> > + */
> > +int ehci_hcd_stop()
> > +{
> > + struct s5p_usb_phy *usb;
> > +
> > + usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
> > + reset_usb_phy(usb);
>
> Well ... if reseting the PHY is enough to stop the controller, I won't
> object ;-)
> ---- Verified the user manual and this seems to be enough to reset the host
> controller.
>
> This patch gives a good impression, I see V2 and then mainline acceptance
> :)
>
> > +
> > + return 0;
> > +}
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
