Dear Gabriel Huau,
> On Sun, Apr 22, 2012 at 10:30:52PM +0200, Marek Vasut wrote:
> > Dear Gabriel Huau,
> >
> > > Signed-off-by: Gabriel Huau <cont...@huau-gabriel.fr>
> > > ---
> > >
> > > arch/arm/cpu/arm920t/s3c24x0/timer.c | 36
> > >
> > > ++++++++++++++++++++++++++++++++++ board/mpl/vcma9/lowlevel_init.S
> > > |
> > >
> > > 22 --------------------- board/samsung/smdk2410/smdk2410.c | 19
> > >
> > > ------------------
> > >
> > > 3 files changed, 36 insertions(+), 41 deletions(-)
> > >
> > > diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> > > b/arch/arm/cpu/arm920t/s3c24x0/timer.c index d8668be..7ff687c 100644
> > > --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> > > +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
> > > @@ -37,8 +37,27 @@
> > >
> > > DECLARE_GLOBAL_DATA_PTR;
> > >
> > > +#ifdef CONFIG_S3C2440
> > > +/*
> > > + * PLL/Clock configuration
> > > + */
> > > +/* FCLK = 405 MHz, HCLK = 101 MHz, PCLK = 50 MHz, UCLK = 48 MHz */
> > > +#define CLKDIVN_VAL 7
> > > +#define M_MDIV 0x7f
> > > +#define M_PDIV 0x2
> > > +#define M_SDIV 0x1
> > > +
> > > +#define U_M_MDIV 0x38
> > > +#define U_M_PDIV 0x2
> > > +#define U_M_SDIV 0x2
> > > +#endif
> >
> > So after applying your patch, timer driver won't build for 2410 ?
>
> Yes it will build, This patch is only for s3c2440. I just moved PLL
> initialization of s3c2440 board to this file. I don't know if theses
> values are correct for s3c2410 too.
I think these should be unified ... all these #ifdef blocks are stupid
>
> > > +
> > > + /* configure MPLL */
> > > + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
> > > +
> > > + /* some delay between MPLL and UPLL */
> > > + __udelay(8000);
> > > +#endif
> > > +
> > >
> > > return 0;
> > >
> > > }
> > >
> > > diff --git a/board/mpl/vcma9/lowlevel_init.S
> > > b/board/mpl/vcma9/lowlevel_init.S index dadaac7..4deb451 100644
> > > --- a/board/mpl/vcma9/lowlevel_init.S
> > > +++ b/board/mpl/vcma9/lowlevel_init.S
> > >
> > > @@ -262,28 +262,6 @@ lowlevel_init:
> > > cmp r3, r4
> > > bne 0b
> > >
> > > - /* setup MPLL registers */
> > > - ldr r1, =CLKBASE
> > > - ldr r4, =0xFFFFFF
> > > - add r3, r2, #4 /* r3 points to PLL values */
> > > - str r4, [r1, #LOCKTIME]
> > > - ldmia r3, {r4,r5}
> > > - str r5, [r1, #UPLLCON] /* writing PLL register */
> > > - /* !! order seems to be important !! */
> > > - /* a little delay */
> > > - ldr r3, =0x4000
> > > -0:
> > > - subs r3, r3, #1
> > > - bne 0b
> > > -
> > > - str r4, [r1, #MPLLCON] /* writing PLL register */
> > > - /* !! order seems to be important !! */
> > > - /* a little delay */
> > > - ldr r3, =0x4000
> > > -0:
> > > - subs r3, r3, #1
> > > - bne 0b
> > > -
> > >
> > > /* everything is fine now */
> > > mov pc, lr
> > >
> > > diff --git a/board/samsung/smdk2410/smdk2410.c
> > > b/board/samsung/smdk2410/smdk2410.c index e9ba922..3beb587 100644
> > > --- a/board/samsung/smdk2410/smdk2410.c
> > > +++ b/board/samsung/smdk2410/smdk2410.c
> > > @@ -69,27 +69,8 @@ static inline void pll_delay(unsigned long loops)
> > >
> > > int board_early_init_f(void)
> > > {
> > >
> > > - struct s3c24x0_clock_power * const clk_power =
> > > - s3c24x0_get_base_clock_power();
> > >
> > > struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
> > >
> > > - /* to reduce PLL lock time, adjust the LOCKTIME register */
> > > - writel(0xFFFFFF, &clk_power->locktime);
> > > -
> > > - /* configure MPLL */
> > > - writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
> > > - &clk_power->mpllcon);
> > > -
> > > - /* some delay between MPLL and UPLL */
> > > - pll_delay(4000);
> > > -
> > > - /* configure UPLL */
> > > - writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
> > > - &clk_power->upllcon);
> > > -
> > > - /* some delay between MPLL and UPLL */
> > > - pll_delay(8000);
> > > -
> > >
> > > /* set up the I/O ports */
> > > writel(0x007FFFFF, &gpio->gpacon);
> > > writel(0x00044555, &gpio->gpbcon);
> >
> > Magic?
>
> I don't maintain theses boards, I just removed PLL initialization
> because I moved it. So for magic values in I/O port, we have to contact
> the maintainers :).
Good idea, please do :-)
>
> > Best regards,
> > Marek Vasut
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
