> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot- > boun...@lists.denx.de] On Behalf Of Luka Perkov > Sent: 18 April 2012 00:52 > To: u-boot@lists.denx.de > Cc: drea...@doukki.net > Subject: [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support > > Add support for new boards RaidSonic ICY BOX NAS6210 and NAS6220. > > NAS6210 has 1 SATA and 1 eSATA port while NAS6220 has 2 SATA ports. > > More information about the boards can be found here: > > http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7036 > http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7515 > > Signed-off-by: Luka Perkov <ub...@lukaperkov.net> > Signed-off-by: Gerald Kerma <drea...@doukki.net> > Signed-off-by: Simon Baatz <gmbno...@gmail.com> > --- > > Changes from version v1: > > * use tools/checkpatch.pl to locate patch errors and fix them > * add two entries in boards.cfg, one for each board > * fixed CONFIG_RESET_PHY_R > * don't define values for macros that enable features only > * remove static RAM configuration > * fix comments > * use only CONFIG_ENV_OFFSET and remove CONFIG_ENV_ADDR > * clean coding style > * add entry in MAINTAINERS file > > Changes from version v2: > > * use defined() in macros for board selection for robustness > > Changes from version v3: > > * don't use utf8 for Geralds name > * don't mix upper/lower case in kwbimage.cfg > * fix prompt > > Changes from version v4: > * fix board Makefile (clean and distclean) > * use generic way to handle arch number of the board > * fix MAINTAINERS file > * move code from Marvell to raidsonic folder > * use CONFIG_MACH_TYPE > * set only necessary GPIOs > * use link instead of address for license > * add few links about board being supported for quick reference > * add previous change logs > * multiple updates to kwbimage.cfg, thank you Simon > > Changes from version v5: > * remove typo from kwbimage.cfg (duplicated lines), thank you David > * clean up comments in kwbimage.cfg > > Changes from version v6: > * replace KW_SATA_PORT0_OFFSET with MV_SATA_PORT0_OFFSET > * change commit message > > Changes from version v7: > * use same config for both boards, because fix for second SATA or > eSATA port > is here: > > http://lists.denx.de/pipermail/u-boot/2012-April/122594.html > > Without that patch uboot *will* work. > > * change some files because of the above > > > MAINTAINERS | 4 + > board/raidsonic/ib62x0/Makefile | 43 +++++++++ > board/raidsonic/ib62x0/ib62x0.c | 79 ++++++++++++++++ > board/raidsonic/ib62x0/ib62x0.h | 40 +++++++++ > board/raidsonic/ib62x0/kwbimage.cfg | 169 > +++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/ib62x0.h | 152 > +++++++++++++++++++++++++++++++ > 8 files changed, 489 insertions(+), 1 deletion(-) >
Applied to u-boot-marvell.git master branch Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
